Figure 11

4.Remove blade and adapter from the crankshaft.

5.The blade may be resharpened by removing it and either grinding or filing the cutting edge keeping as close to the original bevel as possible. Do not attempt to sharpen the blade while it is still on the mower.

6.It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade.

NOTE: Improper blade balance will result in excessive vibration causing eventual damage to the engine and mower. Be sure to carefully balance blade after sharpen- ing. Possible damage resulting from blade unbalance condition is not the responsibility of the manufacturer.

NOTE: Always remove blade from the adapter for testing balance.

7.The blade can be tested for balance by balancing it on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly.

8.Before reassembling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil.

9.Install the blade adapter on the crankshaft with the “star” away from the engine. See Figure 11. Place the blade with the side marked “bottom” (or with part number) facing away from the adapter. Align the blade bell support over the blade with the tabs in the holes of the blade and insert the hex bolt.

10.Tighten the hex bolt to the torque listed below:

Blade Mounting Torque

Center Bolt 450 in. lb. min., 600 in.lb. max.

To insure safe operation of your unit, ALL nuts and bolts must be checked periodically for correct tightness.

Off-Season Storage

The following steps should be taken to prepare your lawn mower for storage.

1.Clean and lubricate mower thoroughly as described in the lubrication instructions.

2.We do not recommend the use of a pressure washer or garden hose to clean your unit.

3.Refer to engine manual for correct engine storage instructions.

4.Coat mower’s cutting blade with chassis grease to prevent rusting.

5.Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer.

NOTE: When storing any type of power equipment in a poorly ventilated or metal storage shed, care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all moving parts of your lawn mower before storage.

5

Maintenance

WARNING

When removing the cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade.

An unbalanced blade will cause excessive vibration when rotat- ing at high speeds. It may cause damage to mower, and could break causing per- sonal injury.

Cutting grass in sandy soil condition causes abrasive wear to the blade.

11

Page 11
Image 11
MTD 60-1616-6 owner manual Off-Season Storage, Remove blade and adapter from the crankshaft, Blade Mounting Torque

60-1616-6 specifications

The MTD 60-1616-6 is a highly versatile compact utility tractor that has gained recognition for its efficiency, durability, and user-friendly features. Designed primarily for residential and light commercial use, this machine is often used for tasks such as mowing, tilling, and landscaping.

One of the standout features of the MTD 60-1616-6 is its powerful engine. It is equipped with a reliable 16 horsepower engine that provides sufficient power for various attachments and implements. This engine is designed for easy starting and smooth operation, ensuring minimal downtime during critical tasks.

The tractor boasts a robust transmission system that allows for smooth and responsive gear shifts. With a choice of multiple speed options, users can customize their performance based on individual needs and terrain types. This flexibility is essential for users who may need to switch between high-speed travel and low-speed tasks like tilling.

Another notable characteristic of the MTD 60-1616-6 is its compact design. The tractor is specifically engineered to be maneuverable in tighter spaces, making it ideal for residential gardens and landscapes. Its smaller size does not sacrifice performance, making it a practical choice for homeowners with various outdoor projects.

The MTD 60-1616-6 is also compatible with a range of attachments, enhancing its functionality. From front-end loaders and tow-behind trailers to tillers and finish mowers, users can easily adapt the tractor for specific tasks. This adaptability allows for exceptional productivity, whether the user is clearing snow in winter or maintaining a garden in summer.

Comfort features are another important aspect of the MTD 60-1616-6. The tractor is designed with an ergonomic seat and adjustable controls, ensuring that operators can work for extended periods with minimal fatigue. Additionally, the tractor’s intuitive control layout makes it easy for both novice and experienced users to operate.

In terms of maintenance, the MTD 60-1616-6 is engineered for ease of access to key components. The design allows for straightforward maintenance tasks, ensuring longevity and reliable performance over time.

In conclusion, the MTD 60-1616-6 is a feature-rich compact utility tractor that combines power, versatility, and user comfort. Its reliable engine, smooth transmission, compatibility with various attachments, and thoughtful design make it a popular choice for homeowners and light commercial users alike.