Tire Pressure
•Before operating, check tire pressure and reduce pressure to between 15 psi and 20 psi.
NOTE: If the tire pressure is not equal in both tires, the unit may pull to one side or the other.
Auger Control
Refer to Auger Control Test on Page 11 to adjust the auger control.
Chute Assembly |
| |
The distance snow is thrown can be adjusted by |
| |
changing the angle of the chute assembly. To do so, |
| |
stop the engine by removing the ignition key and loosen |
| |
the plastic wing knob found on the left side of the chute |
| |
assembly. Pivot the chute upward or downward before | Figure 6 | |
|
14
