A B

Drive

Auger

Figure 3-11

Loosen the Nylock nut on the drive control cable and unthread the cable one full turn. See Figure 3-13.

Recheck adjustment.

Retighten the Nylock nut to secure the cable when correct adjustment is reached.

NOTE: For more details, refer to Drive Control Adjust- ment in the Adjustment Section of this manual.

Auger Control

Check the adjustment of the auger control as follows:

When the auger control is released and in the disengaged “up” position (see Figure 3-11B), the cable should have very little slack, but should NOT be tight. See Figure 3-12.

WARNING:Do not over-tighten the cable. Over-tightening may prevent the auger from disengaging and compro- mise the safety of the snow thrower.

In a well-ventilated area, start the snow thrower engine as instructed on page 12.

While standing in the operator’s position (behind the snow thrower) engage the auger.

Allow the auger to remain engaged for approximately ten seconds before releasing the auger control. Repeat this several times.

With the auger control lever in the disengaged “up” position, walk to the front of the machine.

Confirm that the auger has completely stopped rotating and shows no signs of motion.

IMPORTANT: If the auger shows any signs of rotating, immediately return to the operator’s position and shut off the engine. Wait for all moving parts to stop before readjusting the auger control cable.

To readjust the control cable, unhook the spring (found on the end of the auger cable) from the auger actuator bracket. See Figure 3-12.

Push the cable coupler through the end of the spring to expose the lock nut. See Figure 3-13.

Thread the Nylock nut outward (down the coupler) three full turns to provide more slack in the cable and reattach the spring to the bracket.

A

B

A - For models with steel panels.

B - For models with plastic panels.

Figure 3-12

Figure 3-13

Repeat auger control test to verify for proper adjustment. Repeat previous steps to adjust more, if necessary.

Skid Shoes

Position the skid shoes based on surface conditions. Adjust upward for hard-packed snow. Adjust downward when operating on gravel or crushed rock surfaces. See “Making Adjustment” Section.

Tire Pressure (Pneumatic Tires)

The tires are over-inflated for shipping purposes. Check the tire pressure before operating the snow thrower. Refer to the tire side wall for tire manufacturer’s recommended psi and deflate (or inflate) the tires as necessary.

3

Setting Up

Your Snow

Thrower

WARNING

Never use your hands to clean snow and ice from the chute assembly or auger housing.

IMPORTANT

If the tire pressure is not equal in both tires, the unit may not travel in a straight path and the shave plate may wear unevenly.

9

Page 9
Image 9
MTD 769-04101 warranty Skid Shoes, Tire Pressure Pneumatic Tires, Auger Control

769-04101 specifications

The MTD 769-04101 is a versatile and robust lawn mower designed to deliver efficient performance for both residential and commercial users. Known for its reliability, it offers a host of features that cater to various mowing needs.

One of the standout characteristics of the MTD 769-04101 is its powerful engine. Equipped with a formidable 420cc engine, this mower ensures a strong performance while cutting through thick grass and challenging terrains with ease. The engine is designed for fuel efficiency and minimal emissions, making it an eco-friendly option for users concerned about their carbon footprint.

The MTD 769-04101 features a wide cutting deck, typically measuring 42 inches. This size allows for efficient mowing of large lawns, reducing the time spent on maintaining grassy areas. The deck is constructed from durable materials, ensuring longevity and resilience against wear and tear. With several cutting height options available, users can easily adjust the mower to meet the specific needs of their lawn, achieving a perfect cut every time.

In terms of technology, the MTD 769-04101 includes a reliable electric start system. This feature eliminates the struggle of pull-starting, providing a convenient and user-friendly operation. The mower's transmission system allows for smooth gear shifts, contributing to an overall comfortable mowing experience.

Safety is paramount with the MTD 769-04101. It comes equipped with features such as an automatic blade brake, which ensures that the blades stop quickly when the user releases the handle. This adds an extra layer of protection, making it safer in environments where children or pets may be present.

Another highlight is the mower's ergonomic design. The adjustable handlebar ensures that users of different heights can operate the machine comfortably. Additionally, the mower's maneuverability is enhanced by a tight turning radius, allowing users to navigate around obstacles easily.

Maintenance of the MTD 769-04101 is straightforward thanks to its user-friendly design. The mower provides easy access to various components, ensuring that routine checks and maintenance tasks can be performed without hassle.

Overall, the MTD 769-04101 is a powerful, efficient, and user-friendly choice for anyone looking for a reliable lawn mower. Its combination of technology, safety features, and ergonomic design makes it an excellent investment for maintaining any lawn.