ASSEMBLY
WARNING: To prevent serious personal injury, take the | Bump Slots | Bumps |
following steps before installing or removing the nozzle: |
|
|
• Stop the unit and allow the impeller to come to a complete stop
• Disconnect the spark plug wire
WARNING: To prevent serious personal injury, do not insert hands into the nozzle or blower tube when removing or installing the nozzle.
Nozzle
Blower Tube
Fig. 1
INSTALLING AND REMOVING THE NOZZLE
Installing the Nozzle
1.Align the bump slots on the inside of the nozzle with the bumps on the blower tube (Fig. 1). Push the nozzle onto the blower tube.
2.Turn the nozzle clockwise until it locks into place with an audible click (Fig. 2).
Removing the Nozzle
1.Turn the nozzle counterclockwise until it unlocks from the blower tube (Fig. 2).
2.Pull the nozzle off of the blower tube (Fig. 2).
Lock
Unlock
Fig. 2
6