MTD BCR4 manual

BCR4

4-Cycle Petrol Trimmer

OPERATOR’S

MANUAL

IMPORTANT MANUAL		DO NOT THROW AWAY

Contents

IMPORTANT MANUAL DO NOT THROW AWAY SERVICE INFORMATION CONTENTS OF CARTON • IMPORTANT SAFETY INFORMATION • READ ALL INSTRUCTIONS BEFORE OPERATING SAFETY WARNINGS FOR PETROL TRIMMERS WHILE OPERATING SAVE THESE INSTRUCTIONS SAFETY AND INTERNATIONAL SYMBOLS • SAFETY ALERT SYMBOL • WARNING - READ OPERATOR'S MANUAL • WEAR EYE AND HEARING PROTECTION • KEEP BYSTANDERS AWAY • PRIMER BULB • THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY IGNITION SWITCH • IGNITION SWITCH • HOT SURFACE WARNING • SHARP BLADE KNOW YOUR UNIT APPLICATIONS INSTALLING THE D-HANDLE RECOMMENDED OIL TYPE RECOMMENDED FUEL TYPE DEFINITION OF BLENDED FUELS Using Blended Fuels Using Fuel Additives FUELING UNIT STARTING INSTRUCTIONS Cold Start: First Start of the Day or Engine Ran Out of Fuel Engine Re-Start:Warm Engine With Fuel STOPPING INSTRUCTIONS HOLDING THE TRIMMER ADJUSTING TRIMMING LINE LENGTH DECORATIVE TRIMMING TIPS FOR BEST TRIMMING RESULTS MAINTENANCE SCHEDULE Check for Loose Fastener Parts After Each Use Clean Unit and Labels LINE INSTALLATION Winding the Inner Reel With New Line Single Line Installation Membrane Line Installation Installing A Prewound Reel Replacement Parts AIR FILTER MAINTENANCE SPARK ARRESTOR MAINTENANCE CHECKING THE OIL LEVEL CHANGING THE OIL CARBURETOR SETTING Check Fuel Mixture Clean Air Filter Adjusting the Idle Speed ROCKER ARM CLEARANCE Page REPLACING THE SPARK PLUG CLEANING STORAGE LONG TERM STORAGE TRANSPORTING ENGINE WILL NOT START ENGINE WILL NOT IDLE ENGINE WILL NOT ACCELERATE ENGINE LACKS POWER OR STALLS WHEN CUTTING CUTTING HEAD WILL NOT ADVANCE LINE Page ENGINE DRIVE SHAFT and CUTTING HEAD