RULES FOR SAFE OPERATION

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates danger, warning or caution. Special attention is required in order to avoid serious personal injury. May be used in conjunction with other symbols or pictographs.

NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.

DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire and personal injury.

SYMBOL MEANING

WARNING: Failure to obey a safety warning can result in serious personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire and personal injury.

CAUTION: Failure to obey a safety warning can result in serious personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire and personal injury

• IMPORTANT SAFETY INFORMATION •

READ ALL INSTRUCTIONS

BEFORE OPERATING

•Read the instructions carefully. Be familiar with the controls and proper use of the unit.

•Do not operate this unit when tired, ill, or under the influence of alcohol, drugs or medication.

•Children and teens under the age of 15 must not use the unit, except for teens guided by an adult.

•Inspect the unit before use. Replace damaged parts. Check for fuel leaks. Make sure all fasteners are in place and secure. Replace cutting head parts that are cracked, chipped, or damaged in any way. Make sure the cutting head is properly installed and securely fastened. Be sure the cutting head guard is properly attached, and positioned as recommended. Failure to so can result in personal injury to the operator and bystanders, as well as damage to the unit.

•Use only original equipment replacement line. Never use metal-reinforced line, wire, or rope, etc. These can break off and become a dangerous projectile.

•Be aware of the risk of injury to the head, hands and feet.

SAFETY WARNINGS FOR PETROL TRIMMERS

WARNING: Petrol (gasoline) is highly flammable and its vapors can explode if ignited. Take the following precautions:

•Store fuel only in containers specifically designed and approved for the storage of such materials.

•Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel when the engine is hot.

•Pressure can build up in the fuel tank. Loosen the fuel tank cap slowly to relieve any pressure in the tank.

•Add fuel in a clean, well-ventilated area. Wipe up any spilled fuel immediately. If fuel has been spilled, avoid creating a source of ignition or starting the engine until fuel vapors have dissipated.

•Ensure correct fuel is used. Never operate the unit without the fuel cap securely in place.

•Move the unit at least 9.1 meters (30 ft.) from the fueling point before starting the engine. Do not smoke. Keep sparks and open flames away from the area while adding fuel or operating the unit.

WHILE OPERATING

•Wear safety glasses or goggles and ear/hearing protection at all times when operating this unit. Always wear a face or dust mask if the operation is dusty.

3