MTD E642F, E662E, E602E, E614E manual Contents of Hardware Pack

SECTION 4: CONTENTS OF HARDWARE PACK

Lay out the hardware according to the illustration for identification purposes. Parts are illustrated approximately one-half size. Part numbers are shown in parentheses. (Hardware pack may contain extra items which are not used on your unit.)

A ATTACHING THE HANDLE ASSEMBLY

Hex Bolts

5/16-18 x 1-3/4" Long

(710-3180)

Hex Bolts

5/16-18 x 3/4" Long

(710-3008)

Saddle

(784-5599)

Lock Washers

5/16" I.D.

(736-0119)

Carriage Bolts

5/16-18 x 1-1/2" Long

(710-0262)

Hex Nuts

5/16-18 Thread

(712-3010)

C ATTACHING THE CHUTE CRANK

Flat Washers	Hex Bolt
3/8" I.D. x 5/8" O.D.	5/16-18 x 1-1/2"
(736-0185)	Long

(710-0442)

		Lock Washer
		5/16" I.D.
		(736-0119)
	Hairpin Clip	Hex Nut
(714-0104)
		5/16-18 Thread
		(712-3010)
	AUGER SHEAR BOLTS
F

The augers are secured to the spiral shaft with two shear bolts and hex lock nuts. If you hit a foreign object or ice jam, the snow thrower is designed so that the bolts will shear. Two replace- ment shear bolts and nuts are provided for your convenience. Store in a safe place until needed.

Shear Bolts	Hex Lock Nuts
5/16-18 x	5/16-18 Thread
1-1/2" Long	(712-0429)
(710-0890A)

B ATTACHING THE CHUTE ASSEMBLY
		Hex Bolts
		1/4-20 x 3/4" Long
		(710-3015)
	Hex Lock Nuts
	1/4-20 Thread
	(712-3027)
		Chute Flange
		Keepers
		(731-0851A)
D	ATTACHING THE SHIFT ROD
	AND CLUTCH CABLES
	Ferrule	Hairpin Clips
		(714-0104)
	(711-0677)
	Flat Washers
	5/16" I.D. x 5/8" O.D.
	(736-0264)
		Jam Nuts
		#10-24 Thread
		(712-0121)
	“Z”-Fitting (R)
	(746-0778)
E ATTACHING THE CLUTCH GRIPS
	Hex Screw 5/16-18
	x 2.0 (710-0116)
		Spacer
	.325 I.D. x .50 O.D. x .25
		(750-1032)
	Hex Top L-Nut
	5/16-18 (712-0429)

5