MTD ST720r SPECIFICATIONS, SNOW THROWER ADD-ON, MAINTENANCE AND REPAIR INSTRUCTIONS

MAINTENANCE AND REPAIR INSTRUCTIONS

STORAGE

•Check unit before storage to be sure the equipment is in safe working condition.

•Remove the residue ice or snow from the rotor by briefly running the unit out of the snow.

•Stop the engine or motor.

•Store the snow thrower indoors, in a dry and locked place, out of the reach of children.

•Maintain or replace safety and instruction labels, as necessary.

For gas powerhead units:

•Allow the unit to cool before storing in any enclosure.

•Drain fuel from unit. Never store the unit with fuel in the fuel tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, etc.

TRANSPORTING

•Allow the unit to cool before transporting.

•Secure the unit while transporting.

For gas powerhead units:

•Drain fuel from unit.

•Tighten fuel cap before transporting.

ACCESSORIES/REPLACEMENT PARTS

Shoulder Strap . . . . . . . . . . . . . . . . . . . . . . . . . . .682075

Scraper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .731-2557

Drive Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .754-0633

Flange Lock Nut . . . . . . . . . . . . . . . . . . . . . . . .712-3004A

Use only original MTD replacement parts.

SPECIFICATIONSSNOW THROWER ADD-ON

Unit Weight (Add-On only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2 lbs. (4.17 kg)

Snow Depth (maximum) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-inches (.152 meters)

Cleared Path Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-inches (.305 meters)

11