MTX Audio 622CM Other Blueprint Series Products From Mtx, In-Wallloudspeakers, Accessories, R+ R

OTHER BLUEPRINT SERIES PRODUCTS FROM MTX

MTX offers a wide assortment of audio components. Ranging from in-wall speakers to amplifiers to accessories. Each component is value engineered and must meet strict quality control standards before it becomes part of the MTX product line.

Listed below you will find a sampling of MTX components available from your autho- rized Blueprint Series dealer.

IN-WALL LOUDSPEAKERS

MODEL 520W	MODEL 502W
5-1/4” Two-Way In-Wall Speaker	5-1/4” Two-Way In-Wall Speaker
1” Soft Dome Tweeter	1/2” Polycarbonate Dome Tweeter
8 Ohm Impedance/84dB Sensitivity	8 Ohm Impedance/84dB Sensitivity
53Hz-20kHz Frequency Response	53Hz-20kHz Frequency Response
50 Watts RMS/160 Watts Total	45 Watts RMS/140 Watts Total
11”H x 7-1/2”W x 2-1/2”D	11”H x 7-1/2”W x 2-1/2”D
MODEL 620W	MODEL 602W
6-1/2” Two-Way In-Wall Speaker	6-1/2” Two-Way In-Wall Speaker
1” Soft Dome Tweeter	1/2” Polycarbonate Dome Tweeter
8 Ohm Impedance/85dB Sensitivity	8 Ohm Impedance/85dB Sensitivity
43Hz-20kHz Frequency Response	43Hz-20kHz Frequency Response
55 Watts RMS/180 Watts Total	50 Watts RMS/160 Watts Total
12-1/16”H x 8-9/16”W x 2-7/8”D	12-1/16”H x 8-9/16”W x 2-7/8”D
MODEL 820W	MODEL 600WM
8” Two-Way In-Wall Speaker	6-1/2” Water Resistant Co-Axial In-Wall Speaker
1” Soft Dome Tweeter	1/2” Polycarbonate Dome Tweeter
8 Ohm Impedance/86dB Sensitivity	8 Ohm Impedance/88dB Sensitivity
33Hz-20kHz Frequency Response	64Hz-20kHz Frequency Response
60 Watts RMS/200 Watts Total	35 Watts RMS/140 Watts Total
14-1/16”H x 10-1/16”W x 3-1/2”D	8-5/8”H x 8-5/8”W x 2-3/4”D

SPEAKER/AMPLIFIER SELECTOR

LPS-600

Accommodates up to 6 pair of speakers

Handles up to 250 Watts/channel continuous (RMS)

Impedance Protection Circuitry

Low profile-full size component

Two-piece, plug in connectors on the rear panel

Accommodates up to 14 gauge wire

TV-5 UL Approved Switches

A/B Amplifier and Input Selector

ACCESSORIES

VC-30B/VC-30W

Decora-Style Volume Control (Bone or White)

10 Step 25 Watts per channel (RMS) 150 Watts Peak

AB-1SB/AB-1SW

Decora-Style A/B Switch (Bone or White)

PCK65C

Pre-Construction Kit for Model 610RCM

PCK85C

Pre-Construction Kit for Model 810RCM

FEATURES

The Model 622CM and Model 822CM in-ceiling speakers are designed for use in small rooms or anywhere that both channels of a stereo signal need to be reproduced while taking up a minimum amount of space.

Both models utilize a unique dual voice coil woofer design that allows both channels of a stereo system to drive one cone. This feature coupled with a dual tweeter system allow this unit to operate as two speakers in one.

This unit is of a water resistant design and therefore can be used in high humidity areas such as a bathroom or laundry room.

WIRING DIAGRAM

R+

R-

Model 622CM

Water Resistant

In-Ceiling Loudspeaker

L-

L+