MTX Audio 825W1, 625W Other Products From Mtx, Loudspeaker Placement, In-CeilingLoudspeakers

OTHER PRODUCTS FROM MTX

LOUDSPEAKER PLACEMENT

In-Ceiling Loudspeakers

MODEL 520C

5-1/4” Coaxial In-Ceiling Speaker w/ swivel tweeter

Impedance: 8 ohms nominal

Sensitivity: 85dB

50W RMS/100W Peak Music Frequency Response: 60Hz-20kHz 7-3/4”Dia. x 3-3/4”D

MODEL 825C

8” Coaxial In-Ceiling Speaker w/ swivel tweeter

Impedance: 8 ohms nominal

Sensitivity: 85dB

60W RMS/120W Peak Music Frequency Response: 40Hz-20kHz 10-3/4”Dia. x 4”D

Home Loudspeakers

MONITOR6

6-1/2” Two-Way Home Loudspeaker 19mm Dome Tweeter Impedance: 8 ohms nominal Sensitivity: 89dB

100W RMS/200W Peak Music Frequency Response: 55Hz-20kHz 12 3/4”H x 7 1/2”W x 8 1/2”D

MONITOR10

10” Three-Way Home Loudspeaker 19mm Dome Tweeter Impedance: 8 ohms nominal Sensitivity: 92dB

200W RMS/400W Peak Music Frequency Response: 30Hz-20kHz 31 7/16”H x 11 1/8”W x 14 5/16”D

MODEL 625C

6-1/2” Coaxial In-Ceiling Speaker w/ swivel tweeter

Impedance: 8 ohms nominal

Sensitivity: 85dB

55W RMS/110W Peak Music Frequency Response: 50Hz-20kHz 9”Dia. x 3-1/2”D

MONITOR6C

6-1/2” Center Channel Loudspeaker 19mm Dome Tweeter Impedance: 8 ohms nominal Sensitivity: 92dB

100W RMS/150W Peak Music Frequency Response: 60Hz-20kHz 7 1/2”H x 17 5/8”W x 8”D

MONITOR12

12” Three-Way Home Loudspeaker 19mm Dome Tweeter Impedance: 8 ohms nominal Sensitivity: 94dB

250W RMS/500W Peak Music Frequency Response: 25Hz-20kHz 35”H x 13 1/8”W x 16 1/16”D

MTX In-Wall Speakers are designed to work within any interior decorating scheme. They can be installed in virtually any location where flush mounting is possible. To maximize their sound performance however certain guidelines should be fol- lowed. For the best stereo reproduction the two loudspeakers should be placed an equal distance from your listening position and separated so that the angle between them, at the listening position, is between 40 and 60 degrees.

For best stereo imaging, we recommend that the units be placed so that the tweeters are as close as possible to the ear level of a seated listener. As this is not always possible in keeping with aesthetic design of a particular room, MTX In-Wall Speakers were designed with a pivoting tweeter which rotates to allow you to “aim” the high frequencies toward the listening position.

Normal Dispersion

Dispersion After Tweeter Adjustment

TWEETER LEVEL ADJUSTMENT

TECHNICAL ASSISTANCE

For additional technical assistance you can visit our website at www.mtx.com. Otherwise, our technical service representatives can be reached by phone: 1-800- CALL-MTX or by email: technical@mtx.com.

The output of the tweeter can be adjusted to compensate for speaker placement/ listening positions that are less than ideal. The 0dB position is designed to pro- vide the smoothest frequency response on axis. If the high frequency response is considered to be too strong or too weak, the tweeter level can increased (+3dB position) or decreased (-3dB position) to suit the listeners preference.