Multi-Link manual Stick Programming and Quick Reference Guide

THE STICK PROGRAMMING AND QUICK REFERENCE GUIDE

REGISTER #	PROGRAMMABLE	PROGRAM	FACTORY	PROGRAMMING / INSTALLATION	YOUR
	FEATURE	RANGE	PRESET	RECOMMENDATIONS	PROGRAM
01	FAX Tone Detection	0 = off	ON	Regardless of how you install the Stick, if a FAX/PC
		1 = on		FaxCard is used—Program this feature “ON”
02	Protected Hook	0 = off	OFF	With older KEY and PBX systems, you may need to
	Flash	1 = on		program this feature “ON”
03	Unanswered Call	0 = off	OFF	“UCST” routes all unanswered after-hours calls to
	Silent Transfer	1 = on		fax or modem ports (on any installation)-—
				program "ON”
04	Silent Transfer	0 = fax	FAX	This feature determines what device will receive a
	Destination	1 = modem		call after it has been “silently transferred”
05	Pulse Detection	0 = off	OFF	If you have pulse-dial phones and wish to transfer
		1 = on		or “grab” a call—program this feature ”ON”
06	Call Override	0 = off	OFF	If The Stick is installed at a walljack and you want
		1 = on		to answer a call from any extension phone—
				program “ON”
07	Unrestricted Manual	0 = off	ON	Gives transfer ability at any time, from either party
	Transfer	1 = on		from any phone, recommended programming
				“ON”
08	Answering Machine	0 = off	OFF	After answering machine times out, call will be
	Silent Transfer	1 = on		routed to fax or modem port (any installation)—
				program “ON”
11	Security Access Code	Digits 0-9 *	*1	This register contains the code for transfer of a
	for VOICE Ports	and #		voice or modem call to devices connected to voice 1
		4 digits max.		& 2 ports
12	Security Access code	Digits 0-9 *	*2	This register contains the code for transfer of a
	for FAX Port	and #		voice or modem call to FAX/PC FaxCard
		4 digits max.		CONNECTED to fax port
13	Security access code	Digits 0-9 *	*3	This code is usually sent by calling modem—we
	for MODEM Port	and #		recommend programming a 4 digit code for
				security purposes
		4 digits max.
14	Rings to answer	0 to 10 Rings	0 Rings	If the stick is used on a KSU or PBX set to “0” –
				home installs w/ext. phone access, program needed
				no. of rings
15	Maximum rings	4 to 30 Rings	8 Rings	This feature controls the number of times a device
				(voice, fax, modem) is rung by the stick before
				dropping the call

7