MT202TD User Guide
Modem and Phone Line Connection
This section describes how to install and connect the MT202TD.
Installation Steps:
1.Verify that the remote modem is set for Bell 202- or 202T- compatibility.
2.Connect the modem to the leased line jack using one of the two RJ11 cables provided with the modem.
3.Remove the case (see the next page). Verify
4.Attach the MT202TD to your PC or terminal with an RS- 232 (or V.24) cable.
5.Connect the power transformer to the modem and an AC outlet.
|
|
|
|
|
|
|
|
|
|
PWR |
| RS232 |
|
| LINE | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To DTE
Figure 2-4. Back Panel Connectors
14
