Multi-Tech Systems MT5634ZPX-PCI-U/NV, MT5634ZPX-PCI-V92/NV, MT5634ZPX-PCI/NV quick start

MultiModemZPX Quick Start Guide

Using AT Commands to Configure Your Modem

Non-Windows users can configure the modem using AT commands. You must enter these commands in your communication program’s terminal window.

1.Run your favorite communication program or use PhoneTools (located on the CD packaged with your modem) and open the program’s terminal window.

2.To configure the modem for a specific country:

Type AT%T19,0,nn (where nn is the country code in hexadecimal format

Press ENTER.

The message OK displays.

3.To verify the change: Type ATI9.

Press ENTER.

The country code is displayed in decimal format, as in this example:

Country	AT command	Result code
	(hexadecimal)		(decimal)
Euro/NAM	AT%T19,0,34 (default)		52

The complete list of country codes can be found on the Multi-Tech Web site at http://www.multitech.com/GlobalModem/config.

Step 5: Install the Software (PhoneTools)

You may use either the communication software included with your modem or a third-party program. Communication programs designed for Windows 98+ normally do not need to be manually configured, since they use the Plug and Play configuration of the Windows modem driver. Communication programs designed for other operating systems, however, may need to be manually configured. If you need advice on configuring software, please see the User Guide.

10