Chapter 3 – AT Commands, S-Registers, and Result Codes

Chapter 2 – Installation and Cabling

Step 1 – Attaching the Adapter to a Fixed Location

The Serial-to-Bluetooth Adapter is design to be used on the desktop or to be panel-mounted. To attach the bracket for panel-mounting, following these steps:

1.Typically, the adapter is mounted against a flat surface with two mounting screws. Drill the mounting holes at the desired location. The mounting holes must be separated by 4 -7/16 inches center-to-center.

2.Slide the mounting bracket into the slot on the back of the chassis.

3.Attach the adapter to the surface with two screws.

Multi-Tech Systems, Inc. Serial-to-Bluetooth Adapter User Guide (S000370A)

9

Page 9
Image 9
Multi-Tech Systems MTS2BTA manual Installation and Cabling, Attaching the Adapter to a Fixed Location