Multi-Tech Systems, Inc. RF550VPN Quick Start Guide

3 – Configuring the PC

You must establish TCP/IP communication on each PC (make sure a Network Card or Adapter has been installed into each PC).

If Your Operating System Is Windows 98/Me:

Note: The following procedures are based on Windows 98. Procedures may differ slightly in Windows Me. For Windows 98, check to see that you have installed the Windows 98 patch dated August 1998.

1.Click Start Settings Control Panel.

2.Double-click the Network icon.

3.On the Configuration tab, select the TCP/IP protocol line associated with your network card/adapter.

4.If the TCP/IP protocol line associated with your network card/adapter is listed, proceed to Step 5. If not listed, see the User Guide, Appendix B, for installation directions.

5.Then click the Properties button.

6