Multiquip AR13HAR manual Front Left Drum Removal

maintenance

STEP 1

STEP 4

M

STEP 2

1.JACK FRAME UP SLIGHTLY AT ARTICULATION JOINT.

2.REMOVE THE EIGHT ALLEN HEAD SCREWS HOLDING THE SIDE COVER OF THE DRUM SUPPORT PLATE.

5.PULL DRUM SUPPORT PLATE OFF DRIVE PLATE ASSEMBLY.

6.REMOVE FOUR ALLEN HEAD SCREWS SECURING MOTOR TO DRUM SUPPORT PLATE AND SET ASIDE.

7.REMOVE SIX NUTS SECURING DRIVE PLATE TO SHOCK MOUNTS. PULL OFF DRIVE PLATE AND SET ASIDE.

STEP 9

N

STEP 3

3.MARK AND DISCONNECT HOSES FROM MOTOR.

4.REMOVE FOUR ALLEN HEAD SCREWS FROM DRUM SUPPORT PLATE. (SCREWS MAY NEED TO BE HEATED TO REMOVE)

STEP 6

STEP 5

STEP 7

STEP 8

STEP 8	8.	UN-THREAD SIX SHOCK MOUNTS
		FROM DRUM WALL TO REPLACE.
	9.	PULL EXCITER ASSEMBLY TO
		REMOVE FROM DRUM INTERIOR.
	10.	REVERSE PROCEDURES TO
		REASSEMBLE DRUM. USE
		LOCKTITE ON ALL NUTS AND
		BOLTS.

Figure 33. Front Left Drum Removal

page 30 — AR13HA/AR13HAR ROLLER (s/n 110301 & up) • operation AND PARTS manual — rev. #0 (06/22/11)