AR13HA-R RIDE-ON ROLLER — MAINTENANCE

Alternator/Regulator

The AR-13H is equipped with a 20 amp charging system.This system uses three charge coils connected in parallel. The windings of each coil are wound with heave-duty insulated wire and are further protected by insulating material for long life. A voltage regulator is provided to control the amount of charge voltage being delivered to the 12 volt electrical system. For servicing this charging system, contact your Honda dealer.

Neutral Safety Switch

The travel lever is provided with a neutral safety switch (Figure 40) that prevents the engine from starting when the lever is in the forward or reverse drive position. Lever must be placed in the neutral position in order for the starter to function.

To check this switch, remove the panel located below and to the rear of the floor. This switch is mounted to the lower forward/ reverse lever mechanism. Disconnect the white and green wires. Place the lever in neutral and test for continuity. Place the lever in forward or reverse; no continuity should be present. Repair or replace as required.

Figure 41. Vibration Solenoid

Battery

Mishandling of the battery shortens the service life of the battery ans adds to maintenance cost. When handling the battery do the following:

Be careful not to let the battery electrolyte come in contact with your body or clothing.

Always wear eye protection and rubber gloves, since the battery contains sulfuric acid which burns skin and eats through clothing.

CAUTION - BATTERY ACID BURN HAZARD

If your clothing or skin comes in contact with the battery acid, immediately wash off with running water and get medical attention.

Figure 40. Safety Switch

Vibrator Solenoid

The vibrator solenoid (Figure 41) is located in the manifold valve block and is controlled by the vibration switch located on top of the travel lever.This solenoid controls the vibration control valve which supplies hydraulic oil to the vibration drive motor.

To test the vibration solenoid, turn the ignition switch on. Check for proper supply voltage and ground. If proper voltage and ground are present, check the solenoid for continuity. If no continuity, replace the solenoid coil.If continuity is present, place your hand on the solenoid and turn the switch to the ON position; movement should be felt. DO NOT STARTTHE ENGINE FOR

THISTEST

Check the battery regulary and make sure that each electrolyte level is to the bottom of the vent well (Figure 42). If necessary add only distilled water in a well-ventilated area.

Figure 42. Battery Fluid Levels

PAGE 36 — AR13HA-R RIDE-ON TANDEM DRUM ROLLER — OPERATION & PARTS MANUAL — REV. #9 (06/28/11)

Page 35 Page 37
Page 36
Image 36
Multiquip AR13HAR manual Alternator/Regulator, Neutral Safety Switch
Page 35 Page 37

AR13HA, AR13HAR specifications

The Multiquip AR13HAR and AR13HA are advanced, rugged, and efficient walk-behind rollers designed for various construction and road maintenance applications. These compact rollers are specifically engineered to handle asphalt and soil compaction tasks, making them ideal for both professional contractors and do-it-yourself enthusiasts seeking high-quality performance in compact spaces.

One of the standout features of the Multiquip AR13HAR and AR13HA is their excellent maneuverability. With their tight turning radius, these rollers can easily navigate confined areas, allowing for effective compaction even in challenging sites. This makes them particularly useful for patching, trench work, and other localized applications.

The AR13HAR model is equipped with a reliable water-cooled engine that delivers robust power, ensuring consistent performance throughout the compaction process. The hydraulic system offers smooth operation, allowing operators to adjust the roller's speed and direction with ease. The self-propelled functionality further enhances user experience, catering to various operator preferences.

In terms of compaction capability, both models are fitted with high-frequency vibrating plates that facilitate superior compaction results. The AR13HAR and AR13HA can achieve impressive compaction depths, making them suitable for a wide range of material types. Users can expect consistent and uniform compaction across the working surface, which is essential for building durable pavements and bases.

Another important aspect is their durability. Multiquip has crafted the AR13HAR and AR13HA with robust materials, ensuring that they can withstand the rigors of construction sites. The rollers feature reinforced frames and sturdy drums designed to endure harsh conditions, contributing to a longer lifespan with less maintenance required.

Safety is also a priority in the design of these rollers. They come equipped with essential features like an emergency stop switch and operator protection measures to ensure a secure working environment. Additionally, the ergonomic controls are intuitively positioned, promoting operator comfort and reducing fatigue during extended use.

Overall, the Multiquip AR13HAR and AR13HA represent a perfect fusion of power, agility, and safety in compact roller technology. Their impressive features and robust design make them a reliable choice for professionals looking to enhance efficiency and productivity in their compaction projects. Whether it's a small repair task or a larger construction job, the Multiquip AR13 series can deliver results that meet and exceed expectations.
Top Page Image Contents