operation
Maneuvering the Trowel
1.Get into the operator’s position behind the handle. With a secure foothold and a firm grasp on the handle, slowly increase the engine speed until the desired blade speed is obtained.
2.Figure 31 below illustrates a typical walk-behind trowel application. Practice maneuvering the trowel.The trick is to let the trowel do the work.
3.Continue to practice maneuvering the trowel. Try to practice as if you were finishing a slab of concrete. Practice edging and covering a large area.
Remember a good finishing technique is to work backwards. Be careful when moving backwards so that hazards can be avoided. The best way to get accustomed to the trowel is repeated use.
Figure 31. Maneuvering the Trowel
CAUTION
NEVER place your feet or hands inside the guard rings while starting or operating this equipment.
CAUTION
ALWAYS keep clear of rotating or moving parts while operating this equipment.
b46s90
