BA-SERIES TROWEL— GENERAL INFORMATION

BA-Series Walk-Behind Trowel Familiarization

This walk-behind trowel is designed for the floating and finishing of concrete slabs.

Take a walk around the trowel. Take notice of all the major components (see Figure 3, pages 16 and 17) like the engine, blades, quick pitch control, air cleaner, centrifugal stop switch etc. Check that there is always oil in the engine.

Read all the safety instructions carefully.Safety instructions will be found throughout this manual and on the trowel. Keep all safety information in good, readable condition. Operators should be well trained on the operation and maintenance of the trowel.

Before using your trowel, test it on a flat watered down section of finished concrete that is free of any debris and other objects.

This trial test run will increase your confidence in using the trowel and at the same time it will familiarize you with the trowel’s controls. In addition you will understand how the trowel handles under actual conditions.

Engines

This trowel is available with either an 8.0 HP HONDA, 8.5 HP ROBIN, or a 8.0 HP Briggs and Stratton gasoline engine. Refer to the engine owner’s manual for instructions regarding the operation and maintenance of your engine. The engine manual is included with your trowel at the time of shipment from Whiteman. Please contact your nearest Multiquip Dealer for a replacement should the original manual disappear.

Drive System

Power is transferred from the engine to the gearbox input shaft via a V-belt or pulley drive system. The pulley engages using either a centrifugal or manual clutch. See page 23.

Gearbox

The gearbox is located beneath the engine and transfers power to the rotor or spider assembly. The gearbox controls the rotational speed of the trowel and is equipped with two shafts (input and output).

Spider

The vertical output shaft of the gearbox connects to a cast hub called the spider.The spider has either 3 or 4 arms that extend outward that are used for attachment of blades or other accessories. Remember as the gearbox output shaft rotates so does the spider assembly.

Blades

The blades of the trowel finish the concrete as they are rotated around the surface. Blades are classified as combination (8 inches wide), float (10 or 8 inches wide), and finish (6 inches wide).This trowel comes equipped with either three or four blades per rotor equally spaced in a radial pattern and attached to vertical rotating shaft by means of a spider assembly.

Centrifugal Stop Switch

In the event of a trowel runaway condition (operator releases the handle), a centrifugal stop switch or manual clutch depending on which trowel you have, will stop the engine and bring the trowel to a halt.

CAUTION

NEVER attempt to lift the trowel by yourself. ALWAYS get the assistance of another person to help lift the trowel or use a crane or lifting device to move the trowel.

Moving the BA-Series Walk-Behind Trowel

This walk-behind trowel is designed to be moved and handled in several ways. The easiest way to lift the trowel is to use the auxiliary lifting tube that is attached to the main handle. See page 24, Figure 21. When using the auxiliary tube, always use two persons to lift the trowel.

Some models have a lifting bale (option) installed. A strap or chain can be attached to the lifting bale, allowing a forklift or crane to lift the trowel up onto a slab of concrete. Use a lifting device of adequate lifting capacity to lift the trowel.

Training

For proper training, please use the “TRAINING CHECKLIST” located in the front of this manual (Page 6). This checklist will provide an outline for an experienced operator to provide training to a new operator.

BA-SERIES WALK-BEHIND TROWEL — OPERATION AND PARTS MANUAL — REV. #6 (07/06/10) — PAGE 15

Page 15
Image 15
Multiquip manual BA-SERIES TROWEL- General Information

BA specifications

Multiquip BA is a leading manufacturer of portable, reliable, and efficient construction and industrial equipment. Established with a commitment to quality and performance, Multiquip BA has become synonymous with innovation in various power generation and lighting products. Its extensive range of equipment is designed to meet the diverse needs of contractors, engineers, and various industries, including construction, events, and emergency services.

One of the standout features of Multiquip BA equipment is its robust power generation capacity. The company specializes in generators that are reliable and easy to transport, catering to different power requirements from small-scale residential jobs to large-scale commercial projects. These generators are engineered with advanced technologies that enhance fuel efficiency and reduce emissions, making them an eco-friendly choice for environmentally conscious users.

Another major product line offered by Multiquip BA is its advanced lighting solutions. The company’s portable light towers feature high-intensity LED lights that provide bright, even illumination, making them ideal for nighttime construction work, outdoor events, and emergency situations. Designed for durability, these light towers can withstand harsh weather conditions, ensuring reliable performance in various environments.

Multiquip BA places a strong emphasis on user-friendly designs. Many of its products are equipped with intuitive controls and ergonomic features, allowing operators to easily start and manage the equipment. This design philosophy extends to their equipment’s transportability, with lightweight frames and compact designs that facilitate easy handling and mobility on the job site.

The durability of Multiquip BA equipment is another defining characteristic. Built using high-quality materials, these machines are engineered to endure the rigors of daily use, providing a long service life and reducing the need for frequent repairs. This reliability not only boosts productivity but also helps to minimize downtime.

In addition to its commitment to innovation and quality, Multiquip BA backs its products with exceptional customer support. With a global presence and a network of trained technicians, the company ensures that customers have access to maintenance and repair services whenever needed, enhancing the overall user experience.

In summary, Multiquip BA stands out in the construction and industrial equipment market with its robust range of generators and lighting solutions. Through advanced technologies, user-friendly designs, and a commitment to durability, the company continues to support various industry needs, making it a trusted choice for professionals around the world.