MAINTENANCE

Installation of Winch

1.Reinstall the three retaining screws (Figure 30) and washers that secure the winch to the mast. Tighten screws between 24~ 33 ft-lbs. (33 ~ 45 N-m).

2.Install the four retaining screws and washers (Figure 30) that secure the winch cover. Tighten securely.

3.Turning the winch handle clockwise, wind the cable tightly around the winch shaft.

4.Raise, extend, retract and lower the mast several times to verify correct operation.

5.If the winch malfunctions, such as defective brake mecha- nism, replace entire winch assembly immediately.

Installing the Hanger

1.Reinstall the M12 x 40 bolt (Figure 31) that supports the hanger onto the main mast. Tighten bolt between 28~ 38 ft-lbs. (38 ~ 51 N-m).

Installing the Lamp Power Cable

1.Check the entire lamp cable for any signs of wear, such as cuts or frays. If the cable is damaged in any way, replace entire cable. DO NOT use a worn or damaged cable to operate the GloBug. The possibility exists of shock or electrocution.

2.Using zip ties connect the lamp power cable to the vari- ous mast sections as shown in Figure 33. Remember to connect the lamp cables to the mast in the same order that they were removed.

3.Cutoff any excess zip tie material.

Ballast Box Removal

WARNING - HOT SURFACE (BALLAST)

Dangerous conditions exists inside the ballast compartment. Please use extreme caution when performing maintenance on the ballast box.

NEVER touch the ballast or ballast cover while the lamp is on.These components generate an

extreme amount of heat, which makes their surfaces very hot!. ALWAYS allow the ballast box and cover surface to cool down before servicing.

DANGER - HIGHVOLTAGE (BALLAST)

The electronic components of the ballast generate high voltage conditions. These conditions can be lethal and cause bodily harm, even death. When performing maintenance or troubleshooting, have only experienced personnel work on the ballast.

The ballast electronics are located within the cart frame of the GloBug.To gain access to the ballast (Figure 39), remove the 4 retaining bolts and washers (M10 X 25) that secure the ballast cover to the cart.

BALLAST

COVER M10X25 BOLT AND

WASHER 4 PLACES

BALLAST GUARD BOX

AC POWER

CABLE

TRANSFORMER

CAPACITOR

CART

Figure 39. Removing the Ballast

GB113BC GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #5 (01/16/12) — PAGE 27

Page 26 Page 28
Page 27
Image 27
Multiquip BG113BC manual Installation of Winch, Cutoff any excess zip tie material, Ballast Box Removal
Page 26 Page 28

BG113BC specifications

The Multiquip BG113BC is a cutting-edge concrete and masonry saw designed to meet the demanding needs of construction professionals. This powerful tool combines efficiency, durability, and precision, making it a staple for any mason or contractor looking to deliver high-quality work.

At the core of the BG113BC is its robust engine, which delivers reliable power needed for tough cutting applications. The saw is equipped with a 13 horsepower Honda GX390 engine, which provides both high performance and fuel efficiency. This allows users to work longer hours without the need for constant refueling, helping to improve productivity on job sites.

One of the standout features of the BG113BC is its advanced water containment system. This system is designed to minimize dust production during cutting operations, which is beneficial for both operator safety and compliance with environmental regulations. The integrated water pump ensures that the blade remains cool, reducing wear and tear and extending its lifespan while providing cleaner cuts.

The BG113BC is designed for user comfort and ease of operation. It has a lightweight and compact design that makes it easy to maneuver, even in tight spaces. The adjustable handle provides ergonomic support, allowing operators to maintain a comfortable grip while cutting for extended periods. This reduces operator fatigue and enhances overall effectiveness.

Another impressive characteristic of this concrete saw is its cutting depth capability. With a maximum cutting depth of up to 4.5 inches, it is capable of tackling a variety of materials, including concrete, asphalt, and brick. The blade guard features an easy-to-adjust design that allows operators to quickly change the depth of the cut, increasing versatility on the job.

In terms of technology, the BG113BC incorporates a quick-release blade guard, which simplifies blade changes. This feature significantly reduces downtime and helps maintain workflow. Additionally, the saw is designed with a sturdy frame that reduces vibrations, leading to a more stable cutting experience.

Overall, the Multiquip BG113BC is an exceptional concrete and masonry saw that reflects the brand's unwavering commitment to quality and performance. With its powerful engine, user-friendly features, and innovative technologies, this saw is an invaluable asset for any construction project, ensuring that professionals can achieve precise cuts with ease and efficiency.
Top Page Image Contents