MAINTENANCE

Check Cable Wear

The wire rope (cable) that raises and extends the mast is a very important part of the GloBug lighting system. Following the pro- cedure below when replacing wire rope (cable).

DANGER - Lighting System Cable System

Safety

Wire rope (cable) will fail if it is worn, frayed, misused, crushed,

Removing the Hanger

1.Remove the M12 x 40 bolt (Figure 31) from the hanger support assembly, then remove the hanger. Set hanger aside in a safe place where it will not get damaged.

HANGER

kinked or damaged in any way. ALWAYS check the cable and pulley for any abnormalities before use.

DO NOT use it if there is even the slightest cause for concern and replace any damaged cable or pulley immediately.

Removing the Lamp/Balloon Assembly

1.

Place the lamp/ballon assembly in the STOW position.

2.

With a 5 mm allen wrench, loosen the set screw (Figure 22) that

 

secures the lamp to the mast adapter stand.

MAIN

MAST

SECTION

HANGER

SUPPORT

STEP 2

REMOVE

HANGER

STEP 1

REMOVE

M12 X 40

BOLT

3. Remove the lamp/balloon assembly from the mast adapter

stand and set aside in a safe place where it will not get

damaged.

Removal of Winch

1.Fully lower the mast to its vertical resting position.

2.Remove the four retaining screws and washers (Figure 30) that secure the winch cover. Remove the winch cover.

3.Loosen the winch cable retaining screw. Pull and remove the winch cable from the locking pin.

4.Remove the three retaining screws and washers that secure the winch to the mast. Remove the winch.

Figure 31. Removing the Hanger

Removing the Lamp Cable

1.Cut all the cable zip ties (Figure 32) that secure the lamp cable to the various mast sections.

2.Remove the lamp cable from the various mast sections and set cable aside in a safe place where it will not get damaged. Mark the order of the cable sections so that they can be placed back in the same order. Make sure cable is laid flat and out of the way so that personnel will not trip over it.

STEP 1

 

CUT

 

LAMP CABLE

 

ZIP TIES

 

STEP 2

MAST

 

REMOVE

SECTIONS

LAMP CABLE

 

MARK ORDER

 

Figure 32. Cutting the Lamp Cable ZipTies

Figure 30. Winch/Cable Removal

PAGE 24 — GB113BC GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #5 (01/16/12)

Page 23 Page 25
Page 24
Image 24
Multiquip BG113BC manual Removing the Lamp/Balloon Assembly, Removal of Winch, Removing the Lamp Cable
Page 23 Page 25

BG113BC specifications

The Multiquip BG113BC is a cutting-edge concrete and masonry saw designed to meet the demanding needs of construction professionals. This powerful tool combines efficiency, durability, and precision, making it a staple for any mason or contractor looking to deliver high-quality work.

At the core of the BG113BC is its robust engine, which delivers reliable power needed for tough cutting applications. The saw is equipped with a 13 horsepower Honda GX390 engine, which provides both high performance and fuel efficiency. This allows users to work longer hours without the need for constant refueling, helping to improve productivity on job sites.

One of the standout features of the BG113BC is its advanced water containment system. This system is designed to minimize dust production during cutting operations, which is beneficial for both operator safety and compliance with environmental regulations. The integrated water pump ensures that the blade remains cool, reducing wear and tear and extending its lifespan while providing cleaner cuts.

The BG113BC is designed for user comfort and ease of operation. It has a lightweight and compact design that makes it easy to maneuver, even in tight spaces. The adjustable handle provides ergonomic support, allowing operators to maintain a comfortable grip while cutting for extended periods. This reduces operator fatigue and enhances overall effectiveness.

Another impressive characteristic of this concrete saw is its cutting depth capability. With a maximum cutting depth of up to 4.5 inches, it is capable of tackling a variety of materials, including concrete, asphalt, and brick. The blade guard features an easy-to-adjust design that allows operators to quickly change the depth of the cut, increasing versatility on the job.

In terms of technology, the BG113BC incorporates a quick-release blade guard, which simplifies blade changes. This feature significantly reduces downtime and helps maintain workflow. Additionally, the saw is designed with a sturdy frame that reduces vibrations, leading to a more stable cutting experience.

Overall, the Multiquip BG113BC is an exceptional concrete and masonry saw that reflects the brand's unwavering commitment to quality and performance. With its powerful engine, user-friendly features, and innovative technologies, this saw is an invaluable asset for any construction project, ensuring that professionals can achieve precise cuts with ease and efficiency.
Top Page Image Contents