NAMEPLATE AND DECALS

23

DANGER

Make sure that generator is loaded when conveying Lighting Tower by forklift.

Be sure to insert forks at marked position exactly under pipe frame or base plate

A400116400

2

CAUTION

LAMP COVER BUZZER

Before operating GloBug ALWAYS unzip cover, fold into

bag on top of balloon and zip.

If the cover has not been removed an audible alarm will sound when power is applied to the GloBug.

DCL404

WARNING

When lifting of the GloBug is required, ALWAYS attach a rope or chain to the lift hanger. DO NOT use any other lifting points to lift the GloBug.

CART

DANGER

 

LIFT

 

 

 

HANGER

 

 

 

DCL412

 

 

 

DCL412

 

 

3

DANGER

 

 

 

 

 

 

ELECTRICAL

 

WARNING

 

SHOCK HAZARD

 

 

When replacing lamp and to prevent electrical

BURN HAZARD

 

shock, ALWAYS shutdown the generator before

 

To prevent burns, NEVER

 

replacing lamp. Remember to let lamp cool before

 

touch lamp while lamp is on.

 

removing. Use only recommended type lamp as

 

listed in parts manual.

DCL416

Lamp surface gets extremely

 

 

 

ALWAYS

23

1

CAUTION

COVER

INFORMATION

Before operating GloBug ALWAYS unzip cover, fold into

Make sure that generator is loaded when conveying Lighting Tower by forklift.

Be sure to insert forks at marked position exactly under pipe frame or base plate

A400116400

CAUTION

When the GloBug is used for

6 non-lighting applications, ALWAYS un-plug GloBug AC power cord from the generator.

DCL402

7

hot!

allow sufficient

time for lamp to cool down

 

before touching.

DCL417

4 5

CAUTION

 

WARNING

 

LEVER HAZARD

 

 

ADJUSTMENT

LAMP INFORMATION

 

BE CAREFUL NOT TO

ALWAYS turn lamp OFF

 

STRIKE HEAD AGAINST

11

TOWER ADJUSTMENT

first, before shutting down

LEVER. POSSIBLE HEAD

INJURY CAN OCCUR.

generator.

12

Once lamp is turned OFF,

 

Allow lamp to cool down

 

before turning back on.

 

It will take about 20 minutes

 

 

before lamp can be turned

 

 

back on.

 

 

DCL409

DCL406

21

bag on top of balloon and zip.

Bag Zipper

Cover

NEVER apply power to the GloBug until the cover has been inserted inside the bag and the balloon is fully exposed.

B e f o r e s t o r i n g G l o B u g , ALWAYS fully cover balloon to

prevent damage from dust, dirt and adverse weather conditions.

DCL413

DANGER

ELECTRICAL

SHOCK HAZARD

NEVER touch a live power cord or active electrical components with wet hands or while standing in water. The possibility of electrical shock or even death! exists.

 

8

22

 

DANGER

ON

ELECTRICAL

 

SHOCK HAZARD

 

NEVER place the GloBug

OFF

wheels in standing water. The

possibility of electrical shock,

 

even death! Exists.

DCL408

DCL400

 

10

 

6000

GA

-6H

 

DANGER

ELECTRICAL

SHOCK HAZARD

ALWAYS MAKE SURE AREA ABOVE

TOWER MAST IS OPEN AND CLEAR

OF OVERHEAD POWER LINES.

THE TOWER MAST EXTENDS IN

EXCESS OF 16.5 FT. (5 METERS).

13

DCL403

DANGER

 

 

GloBug

 

 

INFORMATION

 

 

To prevent tipping, NEVER use

 

 

in winds that exceed 22 mph

 

 

(10 m/sec).

 

 

NEVER use on an incline of 5

 

 

degrees or more. The possibility

 

 

of tipping exists.

 

 

NEVER use in rain or wet

 

 

conditions. The possibility of

 

 

electrocution exists.

14

ALWAYS apply parking brake

to prevent moving.

When moving is required, lower

 

 

mast fully.

 

 

When raising mast, ALWAYS

 

 

deploy outriggers to prevent

 

 

tipping.

 

 

ALWAYS turn OFF generator

 

 

DCL410

before performing maintenance.

20

WARNING

19

MODEL

SERIAL NO.

WARNING

To avoid injury,

you MUST read

and understand

operator’s manual

before using this

machine.

This machine to

be operated by

qualified

personnel only.

Ask for training

as needed.

CAUTION

TIRE PRESSURE

ALWAYS keep tires inflated to correct pressure. Low or incorrect tire pressure could result in brake malfunction.

Recommended tire pressure:

DANGER

ELECTRICAL SHOCK HAZARD

GROUND

To prevent electrical shock or

electrocution, the generator MUST be connected to an

earth ground. (See NEC Article 250)

DCL405

15

BURN HAZARD

To prevent burns, NEVER touch ballast or cover while

lamp is on. These surfaces are extremely hot! ALWAYS allow

sufficient time for both surfaces to cool down before touching.

DCL415

18

17

35.5 PSI

(225 kPa)

DCL407

9

WARNING

OUTRIGGER

DEPLOYMENT

SETTING:

Pull outrigger upward at the tip end and rotate backwards until it locks in place.

STOW

POSITION

BALLAST

BOX

HIGH VOLTAGE DANGER

DCL418

O

 

 

UT

 

 

DE R

 

 

IGG

PLO

ERS

 

YED

RELEASE:

To unlock outrigger, push downward on the counter-weight lever indicated by arrow. Grab hold of outrigger, pull upward, push down and place in stow position.

16

DCL414

PAGE 36 — GB113BC GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #5 (01/16/12)

Page 36
Image 36
Multiquip BG113BC manual Nameplate and Decals, Lamp Cover Buzzer

BG113BC specifications

The Multiquip BG113BC is a cutting-edge concrete and masonry saw designed to meet the demanding needs of construction professionals. This powerful tool combines efficiency, durability, and precision, making it a staple for any mason or contractor looking to deliver high-quality work.

At the core of the BG113BC is its robust engine, which delivers reliable power needed for tough cutting applications. The saw is equipped with a 13 horsepower Honda GX390 engine, which provides both high performance and fuel efficiency. This allows users to work longer hours without the need for constant refueling, helping to improve productivity on job sites.

One of the standout features of the BG113BC is its advanced water containment system. This system is designed to minimize dust production during cutting operations, which is beneficial for both operator safety and compliance with environmental regulations. The integrated water pump ensures that the blade remains cool, reducing wear and tear and extending its lifespan while providing cleaner cuts.

The BG113BC is designed for user comfort and ease of operation. It has a lightweight and compact design that makes it easy to maneuver, even in tight spaces. The adjustable handle provides ergonomic support, allowing operators to maintain a comfortable grip while cutting for extended periods. This reduces operator fatigue and enhances overall effectiveness.

Another impressive characteristic of this concrete saw is its cutting depth capability. With a maximum cutting depth of up to 4.5 inches, it is capable of tackling a variety of materials, including concrete, asphalt, and brick. The blade guard features an easy-to-adjust design that allows operators to quickly change the depth of the cut, increasing versatility on the job.

In terms of technology, the BG113BC incorporates a quick-release blade guard, which simplifies blade changes. This feature significantly reduces downtime and helps maintain workflow. Additionally, the saw is designed with a sturdy frame that reduces vibrations, leading to a more stable cutting experience.

Overall, the Multiquip BG113BC is an exceptional concrete and masonry saw that reflects the brand's unwavering commitment to quality and performance. With its powerful engine, user-friendly features, and innovative technologies, this saw is an invaluable asset for any construction project, ensuring that professionals can achieve precise cuts with ease and efficiency.