CDM1H HAND-HELD CORE DRILL — RULES FOR SAFE OPERATION
| DANGER | Read this manual! |
|
| |
|
|
|
Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.
The following safety guidelines should always be used when operating the MQ Model CDM1H Core Drill.
GENERAL SAFETY
■DO NOT operate or service this equipment before reading this entire manual.
■This equipment should not be operated by persons under 18 years of age.
■NEVER operate this equipment without proper protective clothing, shatterproof glasses,
■NEVER operate this equipment when not feeling 
well due to fatigue, illness or taking medicine. 
■NEVER operate this equipment under the influence of drugs or alcohol.
■ALWAYS wear proper respiratory (mask), 
hearing and eye protection equipment when 
operating the core drill.
■Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.
■Manufacture does not assume responsibility for any accident due to equipment modifications.
■NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.
■NEVER operate the core drill in an explosive atmosphere or near combustible materials.The electric motor of this core- drill emits sparks during operation and
causing severe bodily harm or even death if the sparks make contact with combustibe or explosive materials.
■Maintain this equipment in a safe operating condition at all times.
■Keep bystanders, children and vistors away while operating the core drill. Distractions can cause you to loose control.
■DO NOT wear wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts.
■ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
■ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using core drill.
■ALWAYS keep work area clean and free of foreign matter and debris. Also keep work area well lit.
■Avoid accidental starting. Make sure power ON/OFF switch is off before applying power. Carrying the core- drill with your finger on the power switch invites accidental starting.
■NEVER leave the core drill unattended. When not in use always unplug the core drill from power source.
■ALWAYS remove any adjusting keys or wrenches before turing the core drill on. A wrench or key that is left attached to the rotating part of the core drill may result in personal injury.
■DO NOT overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the core drill in unexpected situations.
■Keep all inexperienced and unauthorized people away from the equipment at all times.
■Become familiar with the components of the core drill before operating.
■ALWAYS replace any worn or damaged warning decals.
■NEVER touch drill bit cutting edges during operation. Also allow drill bit a sufficient amount of time to cool before touching.
CDM1H CORE DRILL — OPERATION AND PARTS MANUAL — REV. #6 (09/08/10) — PAGE 7
