CDM1H HAND-HELD CORE DRILL — GENERAL INFORMATION

APPLICATION

COBRA BIT (M18) SET-UPS up to 5-in. dia.

The MQ CDM1H Hand-Held Core Drill is designed to be used for either dry or wet drilling applications involving con- crete type materials. Up to 3-inch (76.2 mm) diameter holes can be drilled for wet drilling applications using standard MQ drill bits or 5-1/8 inch (130 mm) diameter holes for wet or dry applications using the Cobra™ drill bits.

Power Plant

The MQ CDM1H is powered by a 115 VAC electric motor @12 amps.Maximum RPM's is 2200 .The unit weighs 9.0 lbs (3.35 kg.)

Features

The CDM1H kit comes as follows:

Hand-Held Core Bit Power Drill

Carrying Case

Two Core Bit Adapters

Detachable Threaded Handle

Water Kit

Tools for Core Bit Connection/Removal

Operation and Parts Manual

Cobra™ Drill Bits (Wet and Dry)

The Cobra™ drill bits are engineered to drill through reinforced concrete with or without water.These bits are available in 6 or 10 inch (15.24- 25.4 cm.) drilling depths and range in diameter from 1 to 5 inches (25 to 127 mm.).

Standard MQ Drill Bits (Wet)

This core drill can use the following series of wet drilling bits:

GCB Series – economy quality small jobs.

GB Series – standard quality small to mid-size jobs.

PRB Series – premium quality for fast speeds.

PCB Series – super premimum quality and long life.

PCB Series – pro quality, high steel content and extremely hard aggregate small jobs.

Threads/Adapters and Core Bit Combinations

Figure 1 and Table 1 depict most Adapter/Core Bit combinations and part numbers. The CDM1H is manufactured with an 18mm male drive end that directly connects to all MQ COBRA™ drill bits. For other US standard threading options, the CDM1H includes two adapters: (1) ADM1858 – that permits connection of 5/8”-11 female threaded bits, and (2) ADM181147 – that permits connection of 1 ¼”-7 female threaded bits. All other adapters/extensions are available as optional part items.

1

2

1

12

2

BLOCKBUSTER (5/8-in. - 11F) SET-UPS up to 5-in. dia.

1

6

10

13

3

1

6

3

WET BITS 5/8-in. - 11F THREAD up to 3-in. dia.

1

6

10

13

1

4

6

4

WET BITS - 1-1/4 - 7 THREAD up to 3-in. dia.

(Non-COBRA Bits)

1

7

11

14

5

1

7

5

Figure 1. Threads/Adapters and Core Bit Combinations

PAGE 10 —CDM1H CORE DRILL — OPERATION AND PARTS MANUAL — REV. #6 (09/08/10)

Page 10
Image 10
Multiquip manual CDM1H HAND-HELD Core Drill General Information