![CX-HF SERIES HAND MIXERS — COMPONENTS](/images/new-backgrounds/71030/7103023x1.webp)
CX-HF SERIES HAND MIXERS — COMPONENTS
1 | 2 |
|
4
6 | 3 |
5
7
8
9
Figure 1. Mixer Major Components
Refer to Figure 1 for the location of the following mixer components.
1.Ventilation Slits — These openings allow ventilation to the unit to prevent overheating.
2.Safety
3.Protection Frame — Protects the machine casing from dirt and breakage.
4.ON/OFF Switch with Speed Control — Turns the power on and off and regulates the mixing speed.
5.Gear Selection Lever — This lever is used to select the gear (slow or fast) at which the unit is operating (not applicable on CX100HF/CX100HFE).
6.Protection Frame Fastening Screws — Holds the protection frame securely in place.
7.Machine Neck — The mixing tool is attached to the machine neck.
8.HEXAFIX® Quick Action Coupling — This connector attaches the mixing tool to the machine neck.
9.Mixing Tool — This tool is used to mix chemical building products.
PAGE 12 —