Multiquip DCA125USJ operation manual DCA-125USJ - OUTPUT TERMINAL PANEL CONNECTIONS

DCA-125USJ — OUTPUT TERMINAL PANEL CONNECTIONS

3Ø 480/277 Output Terminal Lug Voltages

1.Place the voltage selector switch in the 3Ø 480/277 position as shown in Figure 27.

1Ø 240V/120V Output Terminal Lug Voltages

1.Place the voltage selector switch in the 1Ø 240/120 position as shown in Figure 29.

Figure 27. Voltage Selector Switch 480/277V

Three-Phase Position

2.Connect the load wires to the OutputTerminal Lugs as shown in Figure 28.

Figure 29. Voltage Selector Switch 240/120V

Single-Phase Position

2.Connect the load wires to the OutputTerminal Lugs as shown in Figure 30.

Figure 28. UVWO Terminal Lugs

480/277V Three Phase Connections

3.Turn the voltage regulator knob (Figure 24) clockwise to increase voltage output, turn counterclockwise to decrease voltage output.

Figure 30. UVWO Terminal Lugs

1Ø-240V/120V Connections

3.Turn the voltage regulator knob (Figure 24) clockwise to increase voltage output, turn counterclockwise to decrease voltage output.

DCA-125USJ — OPERATION AND PARTS MANUAL — REV. #2 (01/27/11) — PAGE 31