1000 kW Containerized Diesel Generator Set
Cooling System |
|
| |
Exhaust Manifold Type | Dry |
Radiator Design | Standard Horizontal |
Coolant Capacity - Engine Only | 37 gal. (140 L) |
Water Pump Design/Type | Belt Driven, Centrifugal |
Coolant Flow | 100 gal/min (378 L/min) |
Heat Rejection to Coolant (Standby) | 40600 Btu/min (715 kW) |
Thermostat Range |
Fuel System
Recommended Fuel |
| |||
Filter Micron Size |
|
| 2 | |
Total Fuel Flow |
| 150 gal./hr. (568 L/Hr.) | ||
|
|
|
|
|
| Fuel Consumption |
|
| |
Diesel at % of Load |
| gal/hr |
| L/hr |
25% |
| 19.3 |
| 7.3 |
50% |
| 36.0 |
| 136 |
75% |
| 52.6 |
| 199 |
100% |
| 69.3 |
| 262 |
Lubrication System
Type | Full Pressure |
|
|
Oil Filters | 4 |
|
|
Oil Pressure at Rated Speed | |
Oil Capacity with Filters | 35 gal (132 L) |
|
|
Derating (60Hz)
| Altitude | Ambient | |
The engine power available up to 4958 ft. | Temperature | ||
| |||
at temperatures up to 104oF and up to | Above 4958 ft. |
| |
4433 ft. at 122°F at standby rating, without | derate at 3.4% | Above 122°F, | |
derating. For operation at higher altitudes | per 1000 ft. up to | ||
and ambient temperatures, the power | 9843 ft. Derate | derate an | |
additional | |||
should be derated according to the | an additional 9% | ||
15% per 18°F | |||
following factors: | per 1000 ft. | ||
| |||
| above 9843 ft. |
|
DGC2020 Digital Genset Controller
Digital Controller Features
■Local and Remote Generator Control
■Automatic and manual starting and stopping
■Engine and Generator Protection
■Programmable Analog Engine Senders
■ECU Communications via SAE J1939
■16 Programmable Contact Inputs
■Programmable Logic
■Automatic Transfer Switch Control (Mains Failure)
■Integrated RS485 Modbus Connection
■Auto Synchronizing
■Event recording
Monitoring
■Engine RPM
■Engine run time
■Generator voltage
■Generator current
■Generator frequency
■Oil pressure
■Battery voltage
■Fuel level measurements
■Running Hour Meter
■Coolant temperature
■Generator under/over voltage alarm/shutdown
■Generator under/over frequency alarm/shutdown
■Over Current alarm/shutdown
■Warm up and cooling functions
■Maintenance timer
EGC1000C Rev 3
