maintenance

Maintenance

Perform the scheduled maintenance procedures as defined by Table 5 and below:

Daily

Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary.

Wiring

Inspect the entire generator for bad or worn electrical wiring or connections. If any wiring or connections are exposed (insulation missing) replace wiring immediately.

Piping and Hose Connection

Inspect all piping, oil hose, and fuel hose connections for wear and tightness.Tighten all hose clamps and check fuel or leaks. If any hose (fuel or oil) lines are defective replace them immediately.

Fuel Strainer

1.Thoroughly clean the area around the fuel cap.

2.Remove the fuel cap from the fuel tank.

3.Next, remove, inspect and clean the fuel strainer (Figure 27) with solvent.

Figure 27. Fuel Strainer

Spark Plug

1.Remove and clean the spark plug (Figure 28), then adjust the spark gap to 0.024 ~0.028 inch (0.6~0.7 mm). This unit has electronic ignition, which requires no adjustments.

Figure 28. Spark Plug Gap

Engine Oil

2.Drain the engine oil when the oil is warm as shown in Figure 29.

3.Remove the oil drain bolt and sealing washer and allow the oil to drain into a suitable container.

4.Replace engine oil with recommended type oil as listed in Table 4. For engine oil capacity, see Table 2 (engine specifications). DO NOT overfill.

5.Install drain bolt with sealing washer and tighten securely.

Figure 29. Draining Engine Oil

GA6HB/6HEB 60 hz GENERATOR • operation and parts manual — rev. #0 (03/13/14) — page 27

Page 27
Image 27
Multiquip ga6HB, ga6HEB manual Maintenance, Daily, Wiring, Piping and Hose Connection, Fuel Strainer, Spark Plug, Engine Oil

ga6HB, ga6HEB specifications

Multiquip has established itself as a leading manufacturer of innovative and reliable construction equipment. Among its impressive lineup, the GA6HEB and GA6HB generators stand out due to their advanced features and exceptional performance. Both models cater to a variety of applications, making them suitable for construction sites, events, and emergency power needs.

The GA6HEB generator is equipped with a powerful 6 kW output capability, which makes it ideal for powering tools and equipment in demanding environments. For those looking for a more efficient alternative, the GA6HB offers similar power with a focus on convenience and ease of use. Both units utilize a highly efficient engine, ensuring that fuel consumption is minimized while still delivering reliable power when needed.

One of the defining features of the GA6HEB and GA6HB is their innovative design. Constructed with high-quality materials, these generators are built to withstand the rigors of daily use. Their robust frames provide enhanced durability, ensuring longevity in harsh job site conditions. Additionally, the compact design of both models allows for easy transport and storage, making them a practical choice for contractors and event planners alike.

In terms of technology, these generators include advanced control systems that enhance usability. The user-friendly interface provides operators with vital information at a glance, including voltage output, hour meters, and maintenance reminders. This focus on intuitive operation ensures that even those with minimal experience can efficiently manage these units.

Noise reduction technology is another significant characteristic of the GA6HEB and GA6HB. These generators are designed to operate quietly, allowing for use in noise-sensitive environments without disturbing nearby activities. This feature is particularly beneficial for outdoor events and residential applications, where peace and tranquility are paramount.

Fuel efficiency and runtime are critical for users, and both models deliver impressive performance in this regard. With extended run times on a single tank of fuel, the GA6HEB and GA6HB are perfect for long-term projects where consistent power is needed without frequent refueling.

Overall, the Multiquip GA6HEB and GA6HB generators are exemplary choices for various power needs. Their combination of robust construction, advanced technology, and user-friendly design makes them valuable assets for any project requiring reliable and efficient power solutions. Whether for professional contractors or casual users, these models promise the performance and dependability that Multiquip is renowned for.