MRH800GS — ENGINE COMPONENTS

Figure 5. Engine Controls and Components

INITIAL SERVICING

The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing.

1.

Spark Plug – Provides spark to the ignition system. Set

 

spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch) Clean

 

spark plug once a week.

2.

Air Cleaner – Prevents dirt and other debris from entering

 

the fuel system. Remove wing-nut on top of air filter

 

cannister to gain access to filter element.

3.

FuelValve Lever – OPEN to let fuel flow, CLOSE to stop

 

the flow of fuel.

 

 

 

Operating the engine without an air

 

NOTE

filter, with a damaged air filter, or a

 

filter in need of replacement will

 

 

 

 

allow dirt to enter the engine,

 

 

causing rapid engine wear.

4.

Choke Lever – Used in the starting of a cold engine, or in

 

cold weather conditions. The choke enriches the fuel

 

mixture.

 

5.

Recoil Starter (pull rope) – Manual-starting method. Pull

 

the starter grip until resistance is felt, then pull briskly and

 

smoothly.

 

6. Engine ON/OFF Switch – ON position permits engine

 

starting, OFF position stops engine operations.

7.

Throttle Lever – Used to adjust engine RPM speed (lever

 

advanced forward SLOW, lever back toward operator

 

FAST).

8.

Fuel Tank – Holds unleaded gasoline. For additional

 

information refer to engine owner's manual.

9. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

10. Muffler – Used to reduce noise and emissions.

11. Engine Oil FIller Cap/Dipstick – Remove to check amount

DANGER

Adding fuel to the tank should be done only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill, DO NOT

attempt to start the engine until the fuel residue has been completely wiped up, and the area surrounding the engine is dry.

and condition of oil in crankcase. Refill or replace with

WARNING

Engine components can generate extreme heat.

Topreventburns,DONOTtouchtheseareaswhile the engine is running or immediately after

operating. NEVER operate the engine with the muffler removed.

ecommended type oil as listed in table 2. .

12. Oil Drain Plug –Remove to drain crankcase oil.

13. Engine Starter – Starts engine when ignition key is rotated to the “ON” position.

PAGE 20 — MQ-MIKASA MRH800GS ROLLER — OPERATION AND PARTS MANUAL — REV. #5 (05/27/08)

Page 19 Page 21
Page 20
Image 20
Multiquip GX390K1SM32 manual MRH800GS Engine Components, Initial Servicing
Page 19 Page 21

GX390K1SM32 specifications

The Multiquip GX390K1SM32 is a robust and versatile piece of equipment designed for heavy-duty applications, making it a favorite among contractors and professionals in various industries. At the heart of this unit is a powerful Honda GX390 engine, known for its reliability and impressive performance. This engine provides exceptional torque and power, making it ideal for a wide range of tasks, from construction to landscaping.

One of the standout features of the GX390K1SM32 is its heavy-duty construction, which ensures durability and longevity even in the most challenging environments. The frame and components are designed to withstand wear and tear, reinforcing its reputation as a dependable machine. This durability is complemented by a user-friendly design that prioritizes ease of use. The unit features intuitive controls that allow operators to quickly adjust settings and maximize efficiency on the job site.

The GX390K1SM32 also boasts a unique multi-functional capability. It can be utilized for various applications, including pumping, spraying, and powering equipment, which makes it a truly versatile tool. Its adaptability is enhanced by a range of optional attachments, allowing users to customize the machine to suit specific needs. This flexibility increases productivity and efficiency, reducing the need for multiple pieces of equipment.

In terms of safety, the Multiquip GX390K1SM32 incorporates several features designed to protect the operator and ensure safe operation. These include protective casings and emergency shutoff mechanisms that enhance operational safety. Furthermore, the machine is engineered with an emphasis on stability, making it less prone to tipping or accidents during use.

Another significant aspect of the GX390K1SM32 is its fuel efficiency. The Honda engine is not only powerful but also designed to minimize fuel consumption, which translates into lower operating costs. This efficiency combined with its performance makes it an attractive option for businesses looking to optimize their investment in machinery.

Overall, the Multiquip GX390K1SM32 combines power, versatility, and durability, making it an optimal choice for professionals seeking reliable performance in a myriad of applications. Whether for construction, landscaping, or maintenance tasks, this machine stands out as a top contender in the equipment market. Its impressive features and user-centered design ensure that it can handle the demands of any job with ease and efficiency.
Top Page Image Contents