MQ-MIKASA MRH800GS ROLLER — OPERATION AND PARTS MANUAL — REV. #5 (05/27/08) — PAGE 9
MRH800GS — RULES FOR SAFE OPERATION
■
ALWAYS use extreme care when operating near obstructions,
on slippery surfaces, grades and side slopes.
■
When reversing, particularly on the edges and banks of
ditches, as well as in front of obstacles, the operator must stay
in a standing position at a safe distance from the machine.
■
When operating near any house/building or pipelines, always
check the effect of machine vibration. Stop the work if
necessary.
■
Unauthorized equipment modifications will void all
warranties.
■
Refer to the
Engine Owner's Manual
for engine technical
questions or information.
■
DO NOT operate the vibration roller with the front or rear
cover open.
■
Replace any worn or damaged vibration roller components
immediately.
■
ALWAYS turn the engine

OFF

before performing
maintenance.
■
ALWAYS make sure vibration roller is correctly secured to
the trailer. Check all supports attaching the vibration roller to
the trailer and make sure they are tight.
■
ALWAYS keep the machine away from workers and obstacles.
Also keep the immediate area free of bystanders.
■
ALWAYS check the machine for loosened threads or bolts
before starting.
■
ALWAYS read, understand, and follow procedures in
Operator’s Manual before attempting to operate equipment.
■
ALWAYS be sure the operator is familiar with proper safety
precautions and operations techniques before using vibration
roller.
■
A copy of this manual shall accompany the vibration roller at
all times.
■
DO NOT use worn out hoses or couplings; inspect daily.
■
High Temperatures – Always stop engine and allow the
engine to cool before adding fuel, oil or performing service
and maintenance functions. Contact with

hot

components can
cause serious burns.
■
NEVER disconnect any
"emergency or safety devices"
.
These devices are intended for operator safety. Disconnection
of these devices can cause severe injury, bodily harm or even
death! Disconnection of any of these devices will void all
warranties.

Emergencies

■
ALWAYS know the location of the nearest

fire extinguisher

and

first aid kit

. Know the location of the nearest telephone.
Also know the phone numbers of the nearest

ambulance

,

doctor

and

fire department

. This information will be
invaluable in case of an emergency.

Maintenance Safety

■
NEVER lubricate components or attempt service on a running
machine.
■
ALWAYS allow the machine a proper amount of time to cool
before servicing.
■
Keep the machinery in proper running condition.
■
Fix damage to the machine immediately and always replace
broken parts.
■
Dispose of hazardous waste properly. Examples of potentially
hazardous waste are used motor oil, fuel and fuel filters.
■
DO NOT use food or plastic containers to dispose of
hazardous waste.
■
DO NOT pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.

Lifting

■
The vibration roller has an operating weight of approximately
1530 lbs. (694 kg). Use lifting equipment capable of lifting
this weight.
■
Make sure the engine is off before lifting the machine.
■
Use reliable cable in lifting the machine.
■
Lift upright with sufficient bearing capacity to prevent machine
from tilting or slipping.
■
When lifting, keep the machine away from workers and
animals.