HS62A CUT-OFF SAW — MAINTENANCE
V-Belt Changing Procedure (continued)
Re-tension the V-belt by turning the belt tensioning cam .
The V-belt should remain in tension.
Fully tighten the three nuts that lock theV-belt into the proper tensioning position.
Figure 18. Reversing the Cutting Arm
Re-install the guard and V-beltcovers. Fully tighten the two cap screws and reinstall the adjustment knob .
N
Figure 19. Re-Installing Cover Guard
PAGE 22 — HS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #1 (07/26/10)
