Multiquip HS62A manual Reconnect the guard adjustment knob 

HS62A CUT-OFF SAW — MAINTENANCE

Reversing the Cutting Arm Procedure (continued)

Reverse the cutting arm 180 degrees as shown in the Figure 23, and re-tension the V-belt by turning the belt tensioning

cam .The V-belt should remain in tension.

Fully tighten the three nuts that lock theV-belt into the proper tensioning position.

Figure 23. Reversing the Cutting Arm

Re-attach the cover guard with the 2 cap screws ,

and reconnect the guard adjustment knob .

Figure 24. Re-attaching Cover Guard

PAGE 24 — HS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #1 (07/26/10)