MDR-9D — RULES FOR SAFE OPERATION
■NEVER disconnect any "emergency or safety devices". These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties.
Loading and Unloading (Crane)
■Before lifting, make sure that machine parts (hook and vibration insulator) are not damaged and screws are not loosened or lost.
■Always make sure crane or lifting device has been properly secured to the hook of guard frame on vibratory roller.
■NEVER lift the machine while the engine is running.
■Use adequate lifting cable (wire or rope) of sufficient strength.
■Use one point suspension hook and lift straight upwards.
■NEVER allow any person or animal to stand underneath the machine while lifting.
■Try not to lift machine to unnecessary heights.
Transporting
■Always shutdown engine before transporting.
■Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.
■Drain fuel when transporting vibratory roller over long distances or bad roads.
■Always
■ALWAYS know the location of the nearest and first aid kit.
■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.
Emergencies
■ ALWAYS know the location of the nearest fire extinguisher.
Maintenance Safety
■NEVER lubricate components or attempt service on a running machine.
■ALWAYS allow the machine a proper amount of time to cool before servicing.
■Keep the machinery in proper running condition.
■Fix damage to the machine immediately and always replace broken parts.
■Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.
■DO NOT use food or plastic containers to dispose of hazardous waste.
■DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.
