Multiquip manual MVH306GH Reversible Plate Compactor Components

Models: MVH306GH

1 80
Download 80 pages 7.47 Kb
Page 14
Image 14
COMPONENTS

COMPONENTS

Figure 4. MVH306GH Reversible Plate

Compactor Components

Figure 4 illustrates the location of the major components for the MVH306GH Reversible Plate Compactor.The function of each component is described below:

1. Hand Grip – When operating the compactor use this hand grip to maneuver the compactor.

2. Forward & Reverse Lever – Push the lever forward, the compactor will move in a forward direction, pull the lever backwards, the compactor will move in backwards direction. Placing the lever in the middle (midway) will cause the compactor not to move (neutral).

3. Handle Bar – When operating the compactor, this handle is to be in the downward position. When the compactor is to be stored, move the handle bar to the upright position.

4.Guard Hook - Used to lift the machine with crane or other lifting device.

5.Stopper - Locks the handle in place in the upward position for stowing.

6. Engine – This plate compactor uses a GX270K1-SMX2gasoline engine. Refer to the owner’s manual for engine information and related topics.

7.

Belt Cover – Remove this cover to gain access to the V-

 

belts.NEVER run the compactor without the V-belt cover.If

 

the V-belt cover is not installed, the possibility exist that

 

your hand may get caught between the V-belt and clutch,

 

thus causing serious injury and bodily harm.

8.

Base Plate – Designed to compact sand, clay, and asphalt.

9.

Oil Reservoir – Fill with Shell Tellus Oil 46 or equivalent

 

grade hydraulic oil.

10. Vibration Case – Encloses the eccentric, gears and counter weights.

11. Hydraulic Cylinder – Activated by moving the travel lever. The cylinder controls the direction of movement by the plate compactor.

12. Shock Absorber – Protects plate compactor from damage by absorbing vibration during operation.

13.Throttle Lever – Controls speed of the plate compactor. Place straight vertically to start, push fully counterclockwise for full throttle and fully clockwise to stop plate compactor.

14.Rubber Cover – Lift this rubber cover to gain access to the fuel tank.

PAGE 14 — MVH306GH PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #8 (01/31/14)

Page 14
Image 14
Multiquip manual MVH306GH Reversible Plate Compactor Components