QP-204H — TROUBLESHOOTING (ENGINE/PUMP)

TABLE 7. ENGINE TROUBLESHOOTING (Continued)

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

 

 

 

Operation not satisfactory

 

 

 

 

 

 

Governor adjustment improper?

Adjust governor to correct lever.

 

 

 

 

Governor spring defective?

Clean or replace ignition.

Rotational speed fluctuates.

 

 

Fuel flow erratic?

Check fuel line.

 

 

 

 

 

Air taken in through suction

Check suction line.

 

line?

 

 

 

 

Recoil starter not working

Dust in rotating part?

Clean recoil starter assembly.

 

 

properly.

Spring spring failure?

Replace sprial spring.

 

 

 

 

TABLE 8. PUMP TROUBLESHOOTING

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

 

 

 

 

Not enough priming water in the housing?

Add water.

 

 

 

 

Engine speed too low?

Increase throttle.

 

 

 

 

Strainner plugged?

Clean strainer.

 

 

 

 

Suction hose damaged?

Replace or repair hose, and clamps

 

 

 

 

Air leak at suction port?

Check that fittings are tight and properly sealed.

Pump does not take on water.

 

 

Pump is located too high above water line?

Move pump closer to water.

 

 

 

 

 

Debris collecting in pump housing?

Clean pump housing.

 

 

 

 

Too much distance between impeller and volute.

Adjust clearance by adding shims or replace impeller.

 

Min. .006" - Max. .020"

 

 

 

 

 

 

Water leaking out weep hole between pump and

Check condition of mechanical seal and gaskets,

 

engine?

between pump end and engine housing.

 

 

 

 

Engine speed too low?

Increase throttle speed.

 

 

 

Pump takes in water, little or no

Suction strainer partially plugged?

Clean strainer.

discharge.

 

 

Impeller/Volute worn?

Adjust clearance by adding shims or replace

 

 

 

impeller/volute

 

 

 

 

Fittings/clamps are not sealed properly?

Tighten, replace or add clamp. (Keep extra seals on

Suction hose leaks at inlet.

pump)

 

 

 

 

Hose diameter is too large?

Use smaller diameter hose or replace hose.

 

 

 

Discharge does not stay on

Pressure too high?

Check pressure, add additional clamp.

 

 

coupling.

Hose kinked or end blocked?

Check hose.

 

 

 

 

 

Impeller jammed or blocked?

Open pump cover and clean dirt and debris from

 

 

inside housing.

Impeller does not turn: pump is

 

 

Impeller and volute binding?

Adjust clearance by removing shim from behind

hard to start.

impeller.

 

 

 

 

 

 

Defective engine?

See Engine Owner's Manual.

 

 

 

PAGE 26 — QP-204H CENTRIFUGAL PUMP — OPERATION AND PARTS MANUAL — REV. #3 (06/05/06)

Page 25 Page 27
Page 26
Image 26
Multiquip manual QP-204H Troubleshooting ENGINE/PUMP
Page 25 Page 27

QP-204H specifications

The Multiquip QP-204H is a powerful and versatile portable generator designed to meet the needs of various applications, from construction sites to outdoor events. As a part of Multiquip's lineup of reliable power equipment, the QP-204H combines innovation, efficiency, and durability to deliver exceptional performance.

At the heart of the QP-204H is a robust Honda GX160 engine, known for its reliability and fuel efficiency. This 4-stroke, air-cooled engine offers a maximum output of 2,400 watts and a rated output of 2,000 watts, ensuring that users have ample power for their equipment and tools. The generator is also equipped with a large-capacity fuel tank, allowing for longer run times without the need for frequent refueling.

One of the standout features of the QP-204H is its lightweight and compact design, weighing just 60 pounds. This portability makes it easy to transport to different job sites or recreational areas. Additionally, the generator is equipped with a convenient built-in handle, further enhancing its ease of mobility.

The QP-204H incorporates advanced noise-reduction technology, making it one of the quieter options available on the market. With a noise level of just 58 dBA at a distance of 7 meters, it is ideal for outdoor activities where noise restrictions may apply. This feature ensures that users can enjoy power without disturbing the surrounding environment.

Safety is also a priority with the Multiquip QP-204H. The generator includes a low-oil shutdown system that automatically turns off the engine in case of low oil levels, helping prevent damage and ensuring prolonged operation. This attention to detail helps to give users peace of mind while using the equipment.

The QP-204H offers multiple outlet options, including 120V AC, making it compatible with a variety of devices and appliances. This versatility allows users to utilize the generator for various tasks, from powering power tools on job sites to providing backup power during outages.

In conclusion, the Multiquip QP-204H stands out as a compact, reliable, and efficient portable generator. With its Honda engine, low noise levels, safety features, and multi-outlet capabilities, it is a go-to solution for both professionals and outdoor enthusiasts alike. Whether it’s job site power needs or recreational activities, the QP-204H is designed to deliver dependable performance in any situation.
Top Page Image Contents