Multiquip QP-40TE manual QP- 40TE Initial START-UP Engine

QP- 40TE — INITIAL START-UP (ENGINE)

CAUTION

DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have

been read and	thoroughly
understood.

This section is intended to assist the operator with the initial start-upof the trash pump. It is extremely important that this section be read carefully before attempting to use the pump in the field.

Starting the Engine

1.Place the engine fuel valve lever (Figure 7) to the "ON" position.

Figure 7. Engine Fuel Valve Lever (ON Position)

2.Move the throttle lever (Figure 8) away from the slow position, about 1/3 of the way toward the fast position.

3.Place the choke lever (Figure 9) in the "OPEN " position if starting a cold engine.

Figure 9. Engine Choke Lever (Open)

4.Placethe chokelever(Figure10)inthe"CLOSED"position if starting a warm engine or the temperature is warm.

Figure 10. Engine Choke Lever (Closed)

5.Place the engine ON/OFF switch (Figure 11) in the "ON " position.

Figure 8. Throttle Lever (1/3 Start Position)

Figure 11. Engine ON/OFF Switch (ON Position)

PAGE 18 — QP- 40TE —OPERATION & PARTS MANUAL — REV. #0 (04/13/05)