1. Engine – The MQ R2000H ride-on roller uses an 7.1 HP Honda GX240K1QAE2 air cooled, 4-stroke, single cylinder gasoline engine.This engine uses unleaded gasoline.

2.SteeringWheel — Use this wheel to steer the roller.

3.Parking Break Lever — Pull the lever upward to set the parking break. To release the parking break, press and hold the button on top of the lever and push lever downward.

4.Transmission Control Lever — Push the lever forward to make the roller travel in a forward direction, pull the lever backward to make the roller travel in a reverse direction. Maximum travel speed is 5.6 MPH (9.0 KPH). Center position is neutral, no travel.

5.Documentation Box — Maintain and store at all times Operation, Parts, and Engine manuals in this box.

6.Operator's Seat — A contoured seat that provides visibility of both front rear drum edges during operation. NEVER! start the roller unless seated in the operator's seat.

7.Water Tank/Cap — Remove filler cap and fill with clean fresh water.Water tank capacity is 21 gallons (79.5 liters). If water level is low, add water as necessary.

8.Rear Lifting Point – Attach a crane or suitable lifting device to this point when lifting of the roller is required.

9.Rear Scrapper – This adjustable rear scrapper blade helps prevent the buildup of material between the drum and frame.

10.Rear Roller – This roller is a 32-inch wide steel drum with beveled edges (no vibration). The beveled edges help prevent asphalt marring.

11.Front Lifting Point – Attach a crane or suitable lifting device to this point when lifting of the roller is required.

12.Front Scrapper – This adjustable rear scrapper blade helps prevent the buildup of material between the drum and frame.

13.Front Roller Water Plug – Remove this plug to add water (ballast) to the front drum. This plug is located on each side of the split front roller.

14.Front Roller Zerk Fitting – Grease this fitting as recommended in the maintenance section of this manual.

15.Steering Zerk Fitting – Grease this fitting as recommended in the maintenance section of this manual.

R2000H — ROLLER COMPONENTS

16.Access Panel – Lift this -panel to gain access to the transmission assembly and battery.

A.Transmission – This roller uses a hydrostatic pump which provides hydraulic pressure to the hydraulic drive system. Fill the pump reservoir with hydrostatic transmission fluid. Fill with Mobil 300, GM Dextron B or Ford MCZ-41A type transmission fluid.

Free Wheel Engagement Pin

The hydrostatic transmission is equipped with a free wheel engagement pin, which, when actuated, allows the oil to circulate freely within the roller, thereby permitting the roller to be moved without the engine running. This engagement pin is only to be used in the event the roller is disabled.

This pin is located on the side of the hydrostatic transmission underneath the acess cover.It is actuated by pushing the pin inward and placing the locking clip over the pin to keep it in place.

B.Battery – Provides +12VDC to the electrical system. Replace only with recommended type battery, see specification Table 1.

17.Sprinkler Valve Lever – A gravity feed spray bar is provided on the front and rear of the roller for the wetting of the roll for asphalt pavement. Pull upward on the lever to start the flow of water to the gravity feed system. Push the lever downward to stop the flow of water.

18.Front Roller – This roller is a split 28-inch wide steel drum with beveled edges (no vibration). The beveled edges help prevent asphalt marring.

19.Rear Roller Water Plug – Remove this plug to add water (ballast) to the rear drum. This plug is located on the chain-side of the roller. It is shown here for clarity only.

Tie-Down Transport Points –

Attach a chain or suitable tie-down

NOTE device to these points when transporting of the roller is required.

R2000H RIDE-ON STATIC ROLLER — OPERATION AND PARTS MANUAL — REV. #6 (11/29/10) — PAGE 19

Page 18 Page 20
Page 19
Image 19
Multiquip R2000H manual Free Wheel Engagement Pin, Tie-Down Transport Points, Attach a chain or suitable tie-down
Page 18 Page 20

R2000H specifications

The Multiquip R2000H is a versatile and robust portable generator designed to meet the demands of construction sites, rental industries, and various outdoor events. Known for its reliability and performance, this generator stands out with several key features and technologies that cater to diverse power needs.

One of the main features of the R2000H is its powerful engine. The generator is equipped with a reliable Honda GX390 engine, providing a starting output of 2000 watts and a running output of 1800 watts. This ensures ample power to run essential tools and equipment, such as drills, saws, and lights, effectively and efficiently.

The R2000H showcases advanced inverter technology, which offers clean and stable power that is crucial for sensitive electronic equipment. This feature makes it ideal for job sites where precision and protection of equipment are paramount. Inverter technology also ensures fuel efficiency, allowing for longer run times on a single tank of gas, making it an economical choice for extended use.

Portability is another significant characteristic of the Multiquip R2000H. It is designed with a compact structure and lightweight construction, making it easy to transport from one location to another. The integrated wheels and folding handle allow for smooth mobility, thus enhancing its usability on various job sites or recreational activities.

Additionally, the R2000H is constructed with durability in mind. The robust frame protects the generator from the rigors of job site challenges, while also incorporating features like a quiet muffler to reduce operating noise. This is particularly beneficial for users who need to operate the generator in noise-sensitive environments.

User-friendly controls make the R2000H accessible for novice users, while also providing necessary functionalities for experienced operators. The intuitive panel features multiple outlets, enabling the simultaneous use of different tools, and an easy-to-read fuel gauge that allows users to monitor fuel levels with confidence.

Overall, the Multiquip R2000H combines power, efficiency, and convenience, making it an excellent choice for various applications. Whether powering professional tools on a construction site or providing backup power during outdoor events, this generator is designed to deliver reliable performance with outstanding features and technologies.
Top Page Image Contents