Manuals / Hearth and Home Technologies / Household Appliance / Stove

Hearth and Home Technologies 21M-ACC Millennium Wood Stove ACC Outside Air Kit Installation

Models: 21M-ACC

1 44
Download 44 pages 25.37 Kb
Page 12
Image 12

2100 Millennium Wood Stove (ACC)

R

B. Outside Air Kit Installation

A source of air (oxygen) is necessary in order for combus- tion to take place. Whatever combustion air is consumed by the fire must be replaced. Air is replaced via air leakage around windows and under doors. In homes that have tightly sealed doors and windows, an outside air source is needed. An optional Outside Air Kit is available.

Included in OAK-ACC: Termination cap, (2) wire ties, flex adapter, and fasteners

Included in SRV7033-041:Cover plate and sealing rope (see Floor Installation Alternative below, Figure 12.2)

Items Needed for Installation (not supplied)

•4 inch flex aluminum pipe, or if using alternate material, then it shall be made from durable, non-combustible, heat resistant material up to 350oF. Cut the pipe to the required length for your installation.

•Phillips head screw driver

•Silicone sealant

•Drills and saws necessary for cutting holes through the wall or flooring in your home

WARNING

Fire Risk.

Asphyxiation Risk.

Do not draw outside combustion air from:

•Wall, floor or ceiling cavity

•Enclosed space such as an attic or garage

•Close proximity to exhaust vents or chimneys Fumes or odor may result

WARNING

Asphyxiation Risk.

Outside air inlet must be located to prevent blockage from:

•Leaves

•Snow or ice

•Other debris

Block may cause combustion air starvation

Smoke spillage may set off alarms or irritate sensitive individuals.

1.

Remove all materials from packing box.

 

WARNING

 

 

 

2.

Using a #2 Phillips screw driver attach the flex adapter to

 

Asphyxiation Risk.

 

Length of outside air supply duct shall NOT exceed

 

the stove using 4 screws. Figure 12.1.

 

3.

Remove circular “knock-out” in the base of the pedestal.

 

the length of the vertical height of the exhaust flue.

 

• Fire will not burn properly

4.

Floor & Rear Installation: Cut a 4 inch (102mm) hole in

 

 

• Smoke spillage occurs when door is opened due to

 

outside wall or floor to accommodate outside air piping.

 

air starvation.

 

Use 4 inch (102mm) aluminum metal flex or rigid piping

5. Floor Installation Alternative: In some instances you

 

to directly connect outside air to appliance intake. Use

 

the supplied termination cap with a rodent screen. Seal

 

may not be able to install the flex pipe as show in Figure

 

between the wall (or floor) and the pipe with silicone to

 

12.1. If that is the case, you will need to order SRV7033-

 

prevent moisture penetration.

 

041 which includes a cover plate and sealing rope as

 

 

 

shown in Figure 12.2. The goal is to seal the pedestal

 

 

 

so no room air can leak into the pedestal.

Remove circular “knock-out” in base of pedestal.

Flex Adapter

Wire Tie

Termination

Cap

Flex Line Wire Tie

Cover Plate

Figure 12.1 - Floor & Rear Installation

Figure 12.2 - Floor Installation Alternative

Page 12

7039-131F

September 1, 2008

Page 11 Page 13
Page 12
Image 12
Hearth and Home Technologies 21M-ACC warranty Millennium Wood Stove ACC Outside Air Kit Installation
Page 11 Page 13

21M-ACC specifications

Hearth and Home Technologies' 21M-ACC model represents a significant advancement in the realm of modern home heating solutions. Designed for both aesthetic appeal and functional efficiency, this unit seamlessly integrates contemporary design with advanced technology.

The 21M-ACC is primarily known for its high efficiency, boasting an impressive thermal efficiency rating. This means less fuel is used to produce more heat, thereby reducing energy costs and consumption. One of the standout features is the high-efficiency combustion system that enhances the burning process, ensuring that the maximum amount of fuel is utilized before any emissions are released.

Another key characteristic of the 21M-ACC is its innovative AccuFire technology. This advanced control system allows users to finely adjust the flame height, heat output, and other parameters with precision. This level of customization not only enhances comfort but also contributes to energy savings. The model also features an easy-to-use digital control panel, enabling straightforward adjustments and monitoring of performance.

The design of the 21M-ACC is equally noteworthy. It showcases a sleek and stylish appearance that can complement various home décors, ranging from modern to rustic. The large viewing window provides an unobstructed view of the flames, creating a cozy ambiance while ensuring optimal heat distribution throughout the space.

Safety is paramount in the design of the 21M-ACC. It includes features such as a built-in safety shut-off system and a robust heat shield, which ensures that the exterior remains cool to the touch, making it safe for households with children or pets.

Additionally, this model is compatible with a variety of fuel types, including natural gas and propane, offering versatility for users. Whether utilizing it as a primary heat source or a supplementary feature, the 21M-ACC adapts to individual heating needs and preferences.

In conclusion, Hearth and Home Technologies' 21M-ACC combines efficiency, safety, and design sophistication, making it an exemplary choice for those looking to enhance their living space with a reliable heating solution.