Hearth and Home Technologies 21M-ACC Millennium Wood Stove ACC Blower Optional, Shock Risk

R

2100 Millennium Wood Stove (ACC)

C.Blower (Optional)

1.Remove the 3 bolts (1/4”-20 Phillips head) on the outer skin at the bottom rear of appliance.

2.Align holes in mounting flange of blower with bolt holes in appliance. Blower should be positioned at bottom of rear outer skin as shown in Figure 13.1.

3.Re-insert and tighten bolts, securing blower onto outer wall of appliance.

4.Place the bracket containing the snap disc and magnet under the bottom left rear corner as shown in Figure 13.1.

See page 25 for detailed operating instructions for the blower and snap disc.

Caution

Shock Risk.

•Do NOT remove grounding prong from plug.

•Plug directly into properly grounded 3 prong receptacle.

•Route cord away from appliance.

•Do NOT route cord under or in front of appliance.

Snap Disc Bracket with Magnet

Secure wires with wire tie

	MANUAL: Over-rides the
MANUAL	Snap Disc

FAN

AUTO

	AUTO: Fan will turn ON/OFF
LOW	Automatically by the Snap Disc

HIGH OFF

Controls the Fan Speed

Figure 13.1

September 1, 2008 7039-131F Page 13