INITIAL SERVICING
The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing.
Honda GX Series Engine Shown

WC-62P/S CONCRETE MIXER — BASIC ENGINE COMPONENTS

Figure 3. Engine Controls and Components

5. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel.

6. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture.

1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.

WARNING

Adding fuel to the tank should be accomplished only when the engine is stopped and has had an opportunity to cool down. In the event of a fuel spill,

DO NOT attempt to start the engine until the fuel residue has been completely wiped up, and the area surrounding the engine is dry.

2. Throttle Lever – Used to adjust engine RPM speed (lever advanced forward SLOW, lever back toward operator FAST).

3.

Engine ON/OFF Switch – ON position permits engine

 

starting, OFF position stops engine operations.

4.

Recoil Starter (pull rope) – Manual-starting method. Pull

 

the starter grip until resistance is felt, then pull briskly and

 

smoothly.

7. Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

NOTE

Operating the engine without an air filter, with a damaged air filter, or a filter in need of replacement will allow dirt to enter the engine, causing rapid engine wear.

8. Spark Plug – Provides spark to the ignition system. Set spark plug gap to 0.6 - 0.7 mm (0.028 - 0.031 inch). Clean spark plug once a week.

9. Muffler – Used to reduce noise and emissions.

WARNING

Engine components can generate extreme heat. To prevent burns, DO NOT touch these areas while the engine is running or immediately after operating. NEVER

operate the engine with the muffler removed.

10. Fuel Tank – Holds unleaded gasoline. For additional information refer to engine owner's manual.

PAGE 14 —WC-62P/S CONCRETE MIXERS — PARTS & OPERATION MANUAL — REV. #7 (06/30/05)

Page 13 Page 15
Page 14
Image 14
Multiquip WC-62S manual WC-62P/S Concrete Mixer Basic Engine Components, Engine Controls and Components
Page 13 Page 15

WC-62P, WC-62S specifications

Multiquip, a renowned name in the construction and industrial equipment sector, offers a range of high-performance concrete mixers. Among its impressive lineup are the WC-62S and WC-62P models. These versatile mixers are designed to cater to a variety of job site requirements, making them ideal for both small-scale and large-scale concrete projects.

The WC-62S model is a standout in many ways. It features a robust 6-cubic-foot mixing drum, allowing for efficient batch mixing and superior output. This mixer is equipped with a powerful Honda engine, which ensures reliable performance even in challenging conditions. One of its key characteristics is the heavy-duty steel construction that enhances durability, enabling it to withstand the wear and tear of daily use on the job site.

In terms of technology, the WC-62S incorporates a unique mixing action. The drum rotates in a clockwise direction during mixing, followed by a counterclockwise rotation for discharge. This dual-action mixing process guarantees a thorough blend of materials, resulting in a consistent concrete mix every time. Additionally, the model features a user-friendly control panel with easy-to-understand indicators, making operation straightforward for users of all skill levels.

On the other hand, the WC-62P model caters to similar needs but comes with distinct functionalities. It boasts a self-contained hydraulic system designed for enhanced mixing efficiency. This self-loading mixer can reduce labor costs and time on site, allowing for a quicker turnaround on projects. This model also features an adjustable discharge height, providing versatility when pouring concrete.

Both the WC-62S and WC-62P come equipped with safety features that prioritize user protection. These mixers include emergency stop buttons and rubberized grips to ensure that operators maintain a safe and secure hold throughout mixing tasks. Furthermore, the compact design of these mixers allows for easy transportation and storage, making them an excellent choice for contractors who require mobility.

Overall, the Multiquip WC-62S and WC-62P stand out thanks to their innovative features, durable construction, and operational efficiency. Whether it's for a small repair job or a large-scale construction project, these concrete mixers are designed to meet the demands of various applications. With their reliable performance and user-friendly design, Multiquip's WC-62S and WC-62P mixers continue to be preferred choices for contractors seeking quality and efficiency in their concrete mixing solutions.
Top Page Image Contents