![](/images/new-backgrounds/1229265/22926511x1.webp)
RULES FOR SAFE OPERATION & SAFETY DECALS
■Do not operate or service this equipment before reading the operating and maintenance instructions manual or serious injury may result.
■Do not operate this equipment unless all guards and safety devices are attached and in place.
■Stop the engine when leaving the equipment.
■Block the unit when leaving or when using on a slope
■Maintain this equipment in a safe operating condition at all times.
■Caution must be exercised while servicing this equipment. Rotating and moving parts can cause injury if contacted.
■Stop the engine before servicing, adding fuel and oil.
■When towing, an adequate safety chain must be fastened to the frame, refer to page 9.
■Keep all inexperienced and unauthorized people away from the equipment at all times.
■Unauthorized equipment modifications will void all warranties.
■Check all fasteners periodically for tightness. Also check towing tongue bolt, lock nut and wheel lug nuts for wear.
■Wear safety glasses at all times when working around machinery.
■Stop the engine and disconnect the spark plug before allowing anybody’s hands in the mixing drum.
■Never pour or spray water over the engine or electric motor.
■Always stand clear of dump handle when mixer is in operation. Any binding of material between the mixer blades and drum will cause drum and handle to quickly move in the discharge position.
The safety instruction decals shown must be on all Whiteman Mixers
CAUTION!
SHUT OFF ENGINE BEFORE
PUTTING HANDS IN MIXING DRUM
Caution Decal is: P/N EM948423
SAFETY INSTRUCTIONS
1.Read owners manuals before operating.
2.Keep unauthorized and untrained people away from machine during operation.
3.Make sure all safety devices are in place before this machine is started.
4.Make sure engine is turned off and spark plug wire is disconnected before cleaning the machine.
5.Keep hands and fingers away from moving objects.
6.Do not operate machine in an enclosed area. Proper ventilation is required.
7.Never leave machine unattended when operating.
8.Always stop engine and allow engine to cool before adding fuel or oil.
WHITEMAN CONCRETE PRODUCTS — A MULTIQUIP COMPANY — CARSON, CALIFORNIA
The safety instruction decal is P/N 924801
PAGE 6