DANGERBEFORETOWING

BALL HITCH COUPLER

1.Check vehicle hitch, ball, and coupler for signs of wear or damage. Replace any parts that are worn or damaged before towing.

2.Use only the 2" ball diameter as indicated on your coupler. Use of any other ball diameter will create an extremely dangerous condition which can result in separation of the coupler and ball or ball failure.

3.Be sure the coupler is secured to the hitch ball and the lock lever is down tight and locked.

Recheck tightness again after towing about 50 miles.

4.Check that trailer safety chains are properly connected.

RECOMMENDED MAINTENANCE

1.Smear ball socket and clamp face with chassis grease. Periodically oil pivot points and solutions surfaces of coupler with SAE 30 wt. motor oil.

2.When parking or storing your trailer. Keep the coupler off the ground so dirt will not build up in the ball socket.

DANGER

If housing is deformed,

 

replace complete coupler.

 

USE ONLY GENUINE

 

FULTON REPAIR KITS.

CLEANING — BLADE ADJUSTMENTS

Always disconnect the spark plug wire before cleaning the inside of the drum.

Never pour or spray water over the gasoline engine or electric motor.

For consistent performance, long life and high quality mixing, thoroughly clean the mixer inside and out at the end of each day’s operation.To prevent lumps of dried mortar from forming and contamination of future batches, do not allow a buildup of materials to form on the blades or anywhere inside the drum.

WM-900S, 900P — OPERATIONS

The following is the recommended wiper blade adjustments:

1) STEEL DRUM MIXERS

SIDE SCRAPER

ENDSCRAPER

2) POLYETHYLENE DRUM MIXERS

The poly blade should come as close as possible to the surface without touching. If material builds up on the drum, you may use a rubber mallet to dislodge the material without adverse effect to the drum.

IMPORTANT NOTICE

EPOXY COMPATIBILITY — There are some expoxies and other chemicals used in certain applications that are not compatible with polyethylene tubs.

Since Whiteman Industries cannot control the end user’s application of this product, we will not assume responsibility for the resulting damages when exposed to incompatible chemicals.

PAGE 10 —WHITEMANWM-900S, 900P — PARTS & OPERATION MANUAL — REV. #7 (03/17/06)

Page 10
Image 10
Multiquip WM-900S, WM-900P operation manual Steel Drum Mixers

WM-900S, WM-900P specifications

The Multiquip WM-900P and WM-900S are robust and reliable water pumps designed to cater to a wide range of applications, including construction sites, dewatering tasks, and emergency situations. Both models are part of Multiquip's commitment to providing high-quality equipment tailored for performance, efficiency, and longevity.

The WM-900P is a powerful semi-trash pump that excels in handling muddy and debris-laden water. It is equipped with a 9 HP Honda GX270 engine, which delivers exceptional performance and efficiency. This pump is capable of moving up to 9,600 gallons of water per hour, making it suitable for significant dewatering tasks. Its cast iron volute and impeller provide enhanced durability and resistance to wear, ensuring a longer lifespan even when dealing with abrasive materials.

On the other hand, the WM-900S is a self-priming water pump that offers versatile usage for clear water applications. It is powered by a robust 9 HP engine like its counterpart but is specifically designed to handle clean or slightly dirty water. This model can pump up to 8,400 gallons per hour, making it ideal for household and light industrial applications, irrigation, or swimming pool filling.

Both models feature an easy-access clean-out port, which simplifies maintenance and ensures optimal performance over time. The sturdy frames are designed for portability, equipped with large, puncture-resistant wheels that allow for easy transport across job sites. The pumps also come with a protective frame to safeguard against damage while in transit or in use.

Technologically, the WM-900P and WM-900S incorporate advanced self-priming mechanisms, guaranteeing quick setup and operational readiness. Anti-vibration mounts help reduce noise and provide a more stable operation, which is especially advantageous in residential areas or sensitive environments.

Safety features are also integral to the design of these pumps. Equipped with low-oil shutdown sensors, these pumps prevent engine damage by automatically shutting off when oil levels drop too low. This feature not only enhances the durability of the units but also provides peace of mind to operators.

In summary, the Multiquip WM-900P and WM-900S are expertly designed water pumps that combine performance, efficiency, and durability. Their powerful engines, effective pumping capabilities, and user-friendly features make them indispensable tools for numerous water management tasks, making them a valuable addition to any contractor’s or homeowner’s equipment lineup.