PAGE 14 — WM120PM/SM— OPERATION AND PARTS MANUAL — REV. #7 (09/15/11)
WM-120P/S — PADDLE BLADE ADJUSTMENTB
Paddle blade adjustment is dependent on drum type,
polyethylene
or
steel
. Figure 3 illustrates the paddle blade adjustment when
using a polyethylene drum. Figure 4 illustrates the paddle blade adjustment when using a steel drum. When using a polyethylene
drum the paddle blade should come as close as possible to the drum end and side walls without making contact. If material builds
up on the drum, use a rubber mallet to dislodge the material without adverse effect to the drum.
NOTE
EPOXY COMPATIBILITY - There are some epoxies and other chemicals
used in certain applications that are
not
compatible with polyethylene drums.
Since Whiteman Industries cannot control the end user's application of this
product, we
will not
assume responsibility for the resulting damages when
exposed to incompatible chemicals.
Figure 3. Paddle Blade Adjustment, Polyethylene Drum