WM120PM/SM — OPERATION AND PARTS MANUAL — REV. #7 (09/15/11) — PAGE 7
CAUTION:
Failure to follow instructions in this manual may
lead to serious injury or even death! This
equipment is to be operated by trained and
qualified personnel only! This equipment is for
industrial use only.
The following safety guidelines should always be used when
operating the WM-120PM or WM-120SM mixers:
GENERAL SAFETY
■
DO NOT operate or service this equipment
before reading this entire manual.
■
This equipment should not be operated by persons under 18
years of age.
■
NEVER operate this equipment without proper
protective clothing, shatterproof glasses, steel-
toed boots and other protective devices required
by the job.
■
NEVER operate this equipment when not
feeling well due to fatigue, illness or taking
medicine.
■
NEVER operate this equipment under the
influence or drugs or alcohol.
■
NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.
■
Manufacture does not assume responsibility for any accident
due to equipment modifications.
■
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
■
Always check the machine for loosened threads or bolts before
starting.
RULES FOR SAFE OPERATION■
Always refuel in a well-ventilated area, away from sparks and
open flames.
■
Always use extreme caution when
working with flammable liquids. When
refueling, stop the engine and allow it to
cool. DO NOT smoke around or near the
machine. Fire or explosion could result
from fuel vapors, or if fuel is spilled on a
hot engine.
■
NEVER operate the mixer in an explosive atmosphere or near
combustible materials. An explosion or fire could result
causing severe
bodily harm or even death.
■
NEVER touch the hot exhaust manifold, muffler or cylinder. Allow
these parts to cool before
servicing engine or mixer.
■
The engine section of this mixer requires an adequate free
flow of cooling air. Never operate the mixer in any enclosed or
narrow area where free flow of the
air is restricted. If the air flow is
restricted it will cause serious
damage to the mixer or engine and
may cause injury to people.
Remember the mixer's engine
gives off DEADLY carbon
monoxide gas.
■
High Temperatures – Allow the engine to cool before adding
fuel or performing service and maintenance functions. Contact
with
hot
components can cause serious burns.