1.14 LAYOUT & INSTALLATION

Entering Initial settings
If you press RESET during Initial setup, your machine returns to standby mode. But it
will keep the settings you saved by pressing ENTER as described in these instructions.
1 Switch to the Fax mode by pressing COPY
FAX
SCAN.

Language

2 Press MENU, 9, ENTER.
The machine shows the current language setting.
Language :English
/
/Enter
3 Press or until your desired language appears.
Then press ENTER to save the setting and continue.

Date & Time

4 The machine shows the current calendar/clock setting.

TimeYearMonth
Enter Time
01/01 '04 00:00
Day
5 Use the numeric keys to enter the correct date and time, using a MMDDYY format for
the date and 24-hour format for the time.
For instance, to set 2:15 PM on November 27, 2004, press
1 1 2 7 0 4 1 4 1 5:
To change a digit, press to move the cursor left, or to move it right. Then enter
the correct digit.
6 Press ENTER to save the clock setting and continue.

Daylight saving

7 The machine now asks if you want to set the calendar/clock to automatically recognize
daylight saving time (DST).
Daylight Saving :Off
/
/Enter
When the setting is “On,” your machine automatically recognizes DST at 2 AM on the
appropriate switchover Sundays each year.
When the setting is “Off,” no automatic change will occur.
8 Press or to select “On” or “Off”, then press enter to save the setting.

Fax reception mode

9 The machine now shows the machine’s current reception mode.
Fax Ready
/
/Enter
10 For now, select Fax Ready. (For description of the reception mode, see “Selecting the
reception mode” on page 5.2.)
11 Press ENTER to save the setting and continue.