Do not put furniture or equipment on the power cord
Do not put anything on or over the electrical power cord, and do not route the power cord under rugs or carpets. Doing so can damage the power cord or fax, and can cause fire or electrical shock.
Avoid temperature fluctuations
Sudden changes in temperature can cause damag- ing condensation to form inside your machine.
Allow clearance around the outlet
Don’t stack boxes or furniture around the outlet.
Use supplies manufactured specifically for Muratec machines
Using toner cartridges and other supplies that are not manufactured specifically for Muratec machines may affect the operation of your unit.
Storing and handling toner bottle
To avoid damage to your machine and to assure the best performance possible, follow these guidelines when storing and handling toner bottles:
Store the toner bottle
Store toner bottle at a constant temperature within a range of 10ºC to 35ºC. Do not store bottles in locations subject to extreme fluctuation of
temperature and humidity.
Do not stand the bottle on its end and do not store it upside down.
Do not open the protective bag of the bottle until you are ready to install the bottle.
Do not store bottles in areas of:
•Direct sunlight
•Dusty conditions
•Near floppy disks or other computer media, computer screens, or any other mate- rials sensitive to magnetic fields.
Do not burn toner bottles!
The toner powder is extremely flammable. Exposure to flame can cause toner bottles to burn or explode, causing serious injury.
Be careful not to get the toner powder in your eyes.
If the toner powder gets in your eyes, wash your eyes well and see a doctor.
Keep bottles away from water or oil.
Do not expose bottles to direct sunlight.
Do not expose toner bottles to static or other electrical shock.
iv
