Muratec MFX-3070, MFX-3090 Fax set up (MFX-3090) , Network set up

41
•
C
o
n
f
i
g
u
r
i
ng
y
o
ur
m
a
c
h
i
n
e
Fax set up (MFX-3090)
Your MFP has to be set up properly to allow faxing from the machine. The following
parameters must be set before using the fax function:
• Date and time
• Country code
• Local phone number
• Sender ID
See “Initial set up” on page 64 for details.
Note
If you ran the Muratec driver installer program from the CD-ROM you
may have already set the time zone, date and time (Windows only) via
the Panel Language Setup utility.
Network set up
The MFP must also be set up properly on your network to perform scan to e-mail and
other functions. In order for other network devices to find the MFP on the network,
the following network parameters have to be set.
1. IP Address Set:
2. IP Address:. . .
3. Subnet Mask:. . .
4. Gateway Address:. . .
5. DNS Server:. . .
6. SMTP Server:. . .
7. SMTP Port:25
8. POP3 Server:. . .
9. POP3 Port:110
Explanation:
1. IP Address Set:
Choose Auto to obtain IP/subnet/gateway addresses automatically from DHCP
server. After changing setting from Manual to Auto, the MFP will automatically
reboot the network card.
2. IP Address:
The Internet Protocol (IP) address assigned to your machine by your network
administrator.