MAINTENANCE

LUBRICATION

Every 25 hours and/or at the beginning of each season, make sure the gear box is filled with lubricant (see Figure 9). Tubes of gear lubricant are available from most auto- motive supply stores. Use portable tool grease such as Lubriplate 630AA (Product No. 06787, 1-3/4 oz. tube) or Lubriplate GR-132 (Product No. 15892, 10 oz. tube).

After cleaning and before storage, apply oil to the tine shaft (see Figure 9).

WARNING: Allow the transmis- sion to cool before filling with grease.

1.Remove both left side tines. See “How To Replace The Tines” in the Service and Adjustments section.

2.Remove the air vent screw (see Figure 9).

3.Mount a grease gun onto the grease fit- ting. Fill the transmission until the grease begins to come out of the air vent screw hole.

4.Reinstall the air vent screw.

5.Check the condition of the felt washer (see Figure 9). Replace the felt washer

if it is damaged (see the Repair Parts section in this manual).

6.Clean and lubricate the tine shaft with a few drops of oil.

7.Reinstall the left side tines.

8.Remove the right side tines. Check the felt washer for damage. Clean and oil the tine shaft. Reinstall the right side tines.

Air Vent Screw

Tine

Shaft

Felt

Washer

Grease Fitting

Figure 9

HOW TO CLEAN THE TINES

Always remove dirt and debris from the culti- vator after each use. Remove any string, wire or vegetation that may become lodged in the mechanism and stop the tines from rotating.

1.Release the throttle control and move the on-off switch to the OFF position. Disconnect the spark plug wire from the spark plug.

2.While wearing gloves, remove the hair- pins and clevis pins that secure the tine assemblies to the shaft (see Figure 10). Remove the tines from the shaft.

3.Remove any lodged debris from the shaft and tines. Clean and lubricate the tine shaft with a few drops of oil.

4.Reassemble the tines on the shaft and secure with a clevis pin and hairpin.

5.Connect the spark plug wire to the spark plug.

Clevis

Pins

Hair Pins

Tines

Figure 10

 

 

F-051302L

16

Page 16
Image 16
Murray 11053x92a manual Lubrication, Remove the air vent screw see Figure

11053x92a specifications

The Murray 11053x92a is a standout model that excels in various applications, making it a valuable asset in both residential and commercial settings. This model combines innovative technology and robust design, tailored to meet the demands of modern users.

One of the main features of the Murray 11053x92a is its powerful engine. Equipped with a high-performance motor, this model ensures efficient operation and a high level of reliability. The engine's design emphasizes fuel efficiency, allowing for extended usage without frequent refueling. This is particularly advantageous for lawn care professionals and homeowners alike, as it helps save time and reduces operational costs.

The cutting deck of the Murray 11053x92a is another highlight. With a generous cutting width, it delivers an expansive coverage area, allowing users to complete their tasks more quickly. The adjustable cutting height feature lets users customize grass length, accommodating various lawn conditions and personal preferences. This versatility makes it suitable for tackling both well-maintained lawns and overgrown areas.

In terms of technology, the Murray 11053x92a incorporates user-friendly features that enhance the overall experience. Its easy-start ignition system ensures quick starts with minimal effort, eliminating frustration associated with manual pull-starts. Additionally, the ergonomic handle design provides comfort and control during operation, reducing user fatigue during extended use.

Safety is a paramount consideration in the design of the Murray 11053x92a. It comes equipped with a blade brake system that automatically stops the blade when the operator releases the handle, minimizing the risk of accidents. This feature is especially important for families with children or pets playing nearby.

Moreover, the model’s construction emphasizes durability. Built with high-quality materials, it can withstand the rigors of tough mowing conditions. Its robust frame is designed to resist rust and corrosion, ensuring longevity and maintaining aesthetic appeal over time.

In summary, the Murray 11053x92a is distinguished by its powerful engine, versatile cutting deck, user-friendly features, safety mechanisms, and durable construction. These characteristics make it a reliable choice for anyone in need of an efficient and effective mowing solution, whether for residential lawns or larger commercial properties.