ASSEMBLY
HOW TO ASSEMBLE
THE CHUTE DEFLECTOR
WARNING: The chute deflector is necessary for your safety and protection. Do not operate the mower if the chute deflector is missing or is not installed cor-
rectly.
1.Attach the chute deflector to the mower housing with a bolt, washer, and nut (Figure 1). Make sure the fasteners are tight.
Bolt |
|
1x121 |
|
Washer |
|
17x37 |
|
| Nut |
| 15x116 |
Chute |
|
Deflector | Figure 1 |
|
HOW TO ASSEMBLE THE HANDLE
1.Put the ends of the lower handle into the handle slots (Figure 2).
2.Attach each side of the handle to the mower housing with a bolt, washer, spacer, and nut (Figure 2). Tighten the bolts.
3.Assemble the upper part of the handle to the lower part with the screws and lock- nuts (Figure 3).
| Lower Handle | |
Mower | Flange Nut | |
Housing | ||
15x84 | ||
| ||
Bolt |
| |
1x111 |
| |
| Spacer | |
| 671914 | |
Washer | Figure 2 | |
845 | ||
12 |
Locknut |
15x116 |
Screw |
3x136 |
Figure 3 |
