Murray 425303x92B Maintenance, Transaxle Drive Belt Removal, Transaxle Drive Belt Installation

		MAINTENANCE
TRANSAXLE DRIVE BELT REMOVAL
1.	Remove the battery.
2. Remove the mower housing. See the instructions on “How To
	Remove The Mower Housing”.
3. Remove the variator brake arm the the top of the frame
	channel (see Figure 38). The variator brake arm can be
	accessed through the battery box opening under the seat.
4. Remove the variator Idler spring.
5. REMOVE the two screws on the right side of the variator
	assembly bracket (see Figure 38). LOOSEN the two screws
	on the left side of the variator assembly bracket.		Transaxle
			Drive Belt
	Variator
	Assembly Bracket		Variator
			Idler Pulley
			Transaxle
			Input Pulley
	REMOVE	LOOSEN	Figure 40
	Two Screws	Two Screws
			10. Pull down on the variator assembly and remove the engine
			drive belt from the variator pulley (see Figure 41). Then,
			remove the transaxle drive belt from the variator pulley.
		Variator	11. A correct replacement belt or assistance is available from an
			Authorized Service Center in your area.
		Brake Arm
			Variator
	Variator		Pulley
	Idler Spring	Figure 38
6. Remove the shifter rod from the transaxle shifter link (see
	Figure 39).
			Variator
			Assembly
		Transaxle
		Shifter Link	Transaxle
			Drive Belt
		Figure 39

7.	Remove the transaxle drive belt from the transaxle input
				Figure 41
	pulley (see Figure 40).
8.	Slip the transaxle drive belt off of the variator idler pulley.	TRANSAXLE DRIVE BELT INSTALLATION
9.	Slide the transaxle drive belt forward over the transaxle	1.	To install the transaxle drive belt, reverse the above steps.
	input pulley (see Figure 40) and then over the transaxle	2.	Install the mower housing. See the instructions “How To Install
	shifter link (see Figure 39).		The Mower Housing”.

F–030704L 32